Categories
Categories

how to install the artificial turf

how to install the artificial turf
Case Details

The installation of artificial turf primarily consists of four stages: base preparation, turf laying, joint fixation, and filling and brushing, with slightly different steps for residential courtyards and professional sports fields.

1. How should the ground be treated

1
Clearing and leveling: Remove weeds, stones, and debris to ensure the ground is even, filling in any depressions or uneven areas.
2
Base compaction: Professional sites require soil layer compaction, with a compaction degree typically exceeding 95% to prevent future settlement.
3
Drainage Design: The ground must have a certain slope (e.g., 0.3%-0.5%) to ensure rainwater can be quickly drained and prevent water accumulation.
4
Lay an isolation layer: A layer of weed barrier film can be laid first in the yard to prevent weeds from penetrating and growing through the lawn.

2. How to Lay and Secure the Lawn

1
Unroll and Settle: After unrolling the turf, allow it to rest for a period to release transportation-induced curling stress and ensure uniform grass fiber alignment.
2
Cut and join: Cut to size, overlap the seams by 2–3 cm before cutting, then secure with special connecting tape and adhesive.
3
Gluing: After applying the adhesive, let it dry for 10–15 minutes. When the surface is no longer tacky to the touch, align the pieces and secure them by tapping firmly with a rubber hammer.
4
Fixation method: Small balconies can be secured with double-sided tape, while professional installations require specialized nails or glue for full perimeter reinforcement.

3. How to fill and maintain in later stages

1
Sand and Granule Padding: Professional venues require filling with quartz sand (approximately 18–25 kg/m²) and rubber granules (approximately 5–8 kg/m²) to enhance stability.
2
Brushing the grass fibers: After filling, use a brush machine to brush both vertically and horizontally, ensuring the grass fibers stand upright and the sand particles fully settle into the root zone.
3
Daily Maintenance: Regularly remove leaves and pine needles, rinse stains with clean water, and avoid using chemical cleaners to prevent damage to the grass blades.
4
Usage Restrictions: Prohibit wearing shoes with long nails, avoid vehicle traffic or prolonged heavy weight placement.

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
INFRASTRUCTURE SCENARIO

INFRASTRUCTURE SCENARIO

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
TRANSPORTATION SCENARIOS

TRANSPORTATION SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
INDUSTRIAL SCENARIOS

INDUSTRIAL SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
Leave a message
FirstName*
LastName*
Email*
Message*
Verification Code*
Click to verify