Categories
Categories

How to Apply Back Adhesive to Artificial Grass

How to Apply Back Adhesive to Artificial Grass
Case Details

🧰 Preparation before gluing

1
Clean the ground: Ensure that the foundation ground is flat, dry, free of oil stains and sanding, and avoid weak adhesion in the later stage.
2
Lawn treatment: After the lawn arrives, it should be spread out and left to dry for 24 hours to release the tension during transportation, and then cutting and gluing can begin.
3
Tool preparation: Prepare brushes, rollers or scrapers, rubber hammers, seam cloths, and gloves.

🎯 Core points of adhesive coating

1
Double sided adhesive coating: Apply adhesive evenly on both the back of the lawn and the bonding surface of the seam cloth (or ground), not just one side.
2
Uniform thickness: Use a brush or scraper to apply the paint, keeping the thickness consistent. Do not apply repeatedly, otherwise it is easy to bubble or even peel off.
3
Control the drying time: After applying the glue, let it dry according to the temperature and humidity for 10–30 minutes. It is advisable for the glue to be 80–90% dry and not stick to the touch; Two component glue does not need to be air dried, it can be applied immediately after scraping.
4
One time alignment and bonding: When bonding, align the position at once and do not move the bonded lawn back and forth.
5
Pressure compaction: After bonding, use a rubber hammer to compact from the joint to both sides, or lightly press with a roller to make the adhesive contact surface more complete.
6
Allow sufficient curing time: Curing generally takes 3 days, and reaching optimal strength takes about 10 days; During this period, avoid exposure to direct sunlight, water immersion, and movement.

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
INFRASTRUCTURE SCENARIO

INFRASTRUCTURE SCENARIO

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
TRANSPORTATION SCENARIOS

TRANSPORTATION SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
INDUSTRIAL SCENARIOS

INDUSTRIAL SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
Leave a message
FirstName*
LastName*
Email*
Message*
Verification Code*
Click to verify