Categories
Categories

How to Install Artificial soccer turf

How to Install Artificial soccer turf
Case Details

The installation of artificial football turf mainly involves several steps, including foundation treatment, turf paving, joint bonding, functional line embedding, particle filling, and sorting and acceptance. The filling type (commonly used in professional football fields) has two additional processes, sand injection and particle filling, compared to the non filling type.

1. Basic preparation

1
Basic acceptance: The cement or asphalt foundation should be flat and solid, tested with a 3-meter ruler, with a maximum gap of ≤ 3mm; the drainage slope should meet the standard (0.3% -0.5% horizontally), and there should be no water accumulation within 40 minutes after rain.
2
Cleaning the site: Remove floating dust, sand, gravel, and debris, wipe oil stains with a cleaning agent, and ensure that the basic moisture content is ≤ 5%.

2. Lawn paving

1
Measurement and laying out: Determine the centerline of the site and the position of each functional line according to the drawing, with an error controlled within ± 5mm.
2
Pre laying and drying: The grass roll is unfolded in the same direction as the grass fibers, and left to stand for 24 hours to release curling stress, avoiding color difference and shrinkage.
3
Joint bonding: Lay a 25-30cm wide joint tape under the joint, evenly apply special adhesive, let it dry until it is no longer sticky, align and press it together, and use a roller to roll 3-5 times.
4
Function line embedding: Cut off the green grass according to the layout position, embed it in the white grass, and fix and compact it with connecting tape and glue.

3. Filling and Closing

1
Fill quartz sand: 20-40 mesh quartz sand, with a dosage of about 30kg/㎡, filled in 2-3 times, each time using a grass combing machine to comb and make the sand particles sink into the roots.
2
Filling rubber particles: Environmentally friendly TPE or EPDM particles (particle size 1-3mm), with a dosage of 4-5kg/㎡, filled in batches and combed evenly.
3
Sorting and acceptance: Use a grass combing machine to straighten the grass strands, clean the site, and let them rest for 24-48 hours before putting them back into use.

DIVERSITY OF EXPLORATION

OUTDOOR SCENE

OUTDOOR SCENE

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
INFRASTRUCTURE SCENARIO

INFRASTRUCTURE SCENARIO

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
TRANSPORTATION SCENARIOS

TRANSPORTATION SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
INDUSTRIAL SCENARIOS

INDUSTRIAL SCENARIOS

However, those with sealed components, including motors, controllers, and connectors, can also be operated outdoors. Performance IC forklifts tend to be utilized in heavy-duty applications, such as brick and lumber yards, where larger capacity and performance is required to move the heavy loads.
Leave a message
FirstName*
LastName*
Email*
Message*
Verification Code*
Click to verify