Four-tone green yarn — blades are tufted in several greens rather than one, so the surface shifts with the light instead of reading as a single flat colour. It is the detail that makes this realistic artificial grass hold up in a photograph and under a site inspection.
Brown curled thatch — a curled fibre rooted in the backing lifts the pile and breaks up the colour at the base, which softens seam lines and takes the hard edge off a newly laid area.
PP + PE blend — polypropylene gives the blade its shape and keeps the pile standing; polyethylene takes the harshness out of the hand-feel. Together they hold the surface upright under chairs and footfall without making it feel like bristle.
PP net + SBR latex backing — a woven polypropylene net carries the tufts and SBR latex locks them in place. The composite resists water uptake and keeps its dimensions when a roll is opened after weeks in a container.
Perforated backing — the latex layer is perforated so surface water passes through to the base instead of sitting under the sheet, which matters on a roof deck or in a courtyard with a single fall.
A shade that repeats — every roll is run to the colour approved on your sample, so a second order matches the first. It is the part of the job an artificial grass manufacturer is judged on, and it is why we ask for a signed-off sample before production. Four greens and a brown thatch, tufted into a 25 mm pile: this is the landscape turf in our range that is bought for how it looks rather than for a density argument. From a few metres away it reads as a mown lawn; close up, the mix of green shades and the curled brown fibre at the root stop it flattening into one solid colour — the effect that gives inexpensive turf away in photographs and on a site visit. The pile is short enough to stay upright underfoot and soft enough for a terrace where people walk in bare feet. It suits the people who have to make a public space look finished: landscape architects and designers choosing a surface for a render or a show garden, facility managers keeping a hotel forecourt or a podium deck presentable, and contractors who need the tenth roll to look like the first. As a landscape turf supplier we work mainly with importers, distributors and project contractors, so this roll is packed and quoted for container quantities rather than single pieces. Outside it goes over a prepared aggregate base; indoors, or on a hard surface, it is laid over a suitable underlay or bonded down. That is why the same roll serves a roof terrace, a hotel lobby display and a storefront window without a change of specification. We supply it as an artificial grass manufacturer working to container schedules, with shade, roll length and packing confirmed before production starts. The surface uses high-grade PP and PE fibers in a 16,800 lbs density with a 20 mm pile height, balancing cushioning with resilience. Its waterproof backing combines PP, net, and SBR latex to support longevity in wet conditions. Size and color can be adjusted on custom orders, with production typically taking 7 to 15 days. The construction is designed to meet performance expectations for artificial turf fields and landscaping projects that need durability with low maintenance. That build is intended to minimize wear and hold its structure under heavy foot traffic and changing weather, while supporting faster installation and lower lifecycle costs. Custom specifications can be aligned with the project's functional needs to improve long-term value and reduce maintenance for the owner.
Pile Height and Site Fit
The same build, 5 mm apart. QS032 and the 30 mm landscape model use the same PP + PE yarn and the same PP net + SBR latex backing. What changes is how much fibre sits between the base and your foot: 25 mm reads as a close-mown lawn with a crisp edge, 30 mm as a fuller, softer lawn.
Take 25 mm where the surface is looked at. Hotel frontages, terraces, roof decks, show gardens, sales suites and balconies — places where a tidy, even finish and a sharp edge matter more than cushioning.
Step up to 30 mm where people sit and play. A private lawn used barefoot every day, a children's play area, a lounging terrace or a heavily used commercial lawn earns its keep from the extra pile underfoot.
Weight on a roof deck. A taller pile carries more yarn per square metre. If the turf goes on a podium or a roof, check that difference against the deck's load allowance before you decide — on those sites it usually settles 25 mm artificial grass versus 30 mm on its own.
Neither height is a sports surface. For studded boots, ball bounce or a marked pitch, move to the football models; a landscape pile mats where play repeats in the same spot.
Measure the prepared base, not the drawing. Take the finished length and width of the base, add an allowance at every edge for trimming, note where the joins will fall so they stay off the main sight line, and fix the direction the pile should lean so every roll runs the same way. Send the plan with your enquiry and we will convert it into roll lengths.
The base decides more than the 5 mm. A flat, well-drained, properly restrained base makes a 25 mm surface look better than a 30 mm roll laid over a poor one. Settle the build with your installer first, then choose the height — that order saves the most money on landscape artificial grass schemes.
Use Scenarios
Hotel and resort grounds
Forecourts, pool surrounds and event lawns — areas that have to look dressed every day of the year and end up in guests' photographs. The surface takes a rinse and a brush instead of a mower, and it does not turn to mud where people cut across it.
Show gardens, sales suites and display courtyards
A 25 mm pile holds a crisp edge for a garden that will be looked at closely and then taken apart; the shade is repeatable, so the second phase of a development matches the first.
Roof terraces and podium decks
No irrigation and no soil load, and the perforated backing lets rain through to the deck drainage. This is where 25 mm artificial grass usually wins over a taller pile, because height is weight on a roof.
Commercial frontage, plazas and event space
Entrances, pop-up spaces and photography sets, where the surface has to look right in a picture and survive being walked on all day.
Private lawns
In a garden the same roll gives a flat, green surface that stays usable through winter and needs nothing more than a brush. It is the simplest artificial grass garden specification in the range.
Stadium surrounds and venue edges
Concourses, hospitality terraces and the green edges around a pitch — the parts that are seen on camera but are not the playing surface. For the pitch itself, the football and multi-sport models are the right build.
Commercial landscaping and public realm
Medians, park edges, courtyard planting and urban green space, where the brief is a consistent surface across a large area with upkeep that fits a fixed budget. Most artificial grass for landscaping of this kind is specified at 25 to 30 mm for exactly that reason. Modular construction with customizable dimensions and color variants allows precise adaptation to project parameters, helping deliver a consistent fit and uniform appearance across large-scale installations. Production is standardized to support efficient assembly.
Specifications
Model
QS032
Pile height
25 mm
Yarn
PP + PE blend
Yarn weight
10,000 d
Density
18,900 lbs
Backing
PP net + SBR latex
Pile finish
Four-tone green with brown curled thatch
Colour
Customised to your scheme
Form
Rolls, cut to your order dimensions
Typical use
Landscape, hospitality and commercial green areas
Product Advantages
Cut to your plan — rolls are made to the length and width your drawing calls for, so a large scheme is laid in fewer pieces and the joins land where you plan them instead of where the roll runs out.
One shade across the whole site — every run is produced to the same approved shade and yarn, so the far end of a plaza matches the entrance. It is the difference that matters most on landscape artificial grass, where the client sees the whole surface at once.
Stable in sun and rain — the PP and PE blend holds colour and standing pile better than a single-polymer yarn, and the latex backing does not swell as water passes through it.
Keeps its lines under traffic — the tuft resists matting along the routes people actually walk, so a forecourt or a frontage still looks dressed at the end of a season.
Cheaper to run than grass — no irrigation, no mowing, no fertiliser and no mud after rain; rinsing and brushing replace the maintenance contract, which is the argument that usually carries a facilities budget and the one a landscape turf supplier is asked for most often.
A strong anchor for a range — importers put this model at the front of an artificial turf wholesale programme because it photographs well and sits between the entry rolls and the premium landscape lines. A buyer can show it next to a 30 mm lawn and a golf green without the three looking like unrelated products.
Installation Sequence
Site preparation. Strip the area, remove roots and stones, and set a fall so water leaves the surface. Edging or a restraint goes in now, before anything is rolled out — on a small artificial grass garden that is usually a timber or concrete edge; on a roof deck it is a drainage mat under the turf.
Measuring and marking out. Measure twice and set string lines to the finished edges. Decide where the joins will fall and keep them away from the main sight line and away from a doorway, where a seam is most obvious.
Laying the base layer. Outside, a compacted aggregate base graded to the fall is the standard build for artificial grass for landscaping schemes; inside or on a hard surface, use a suitable underlay or bond the turf directly. The smoother the base, the less the pile shows every imperfection underneath it.
Laying the turf. Roll out in the direction the pile leans, let the turf relax in the sun for a few hours, then trim with an allowance at every edge. Seams are cut straight, joined with tape and adhesive, and the edges fixed under the restraint.
Infill with silica sand and rubber granules. Where the specification calls for infill, kiln-dried silica sand and rubber granules are brushed in to weight the pile and support the fibres. Landscape work often takes a light sand dressing only — confirm the dressing for your site before the roll leaves.
Brushing and finishing. A power brush stands the fibres up and works the thatch through the pile. Trim the last edges, blow off the trimmings, and check that no seam is lifting before the area is handed over.
Handover and maintenance. Walk the site with the client, note any seam, edge or drainage point that needs attention, and agree who brushes and inspects the surface and how often. On landscape artificial grass the two jobs that matter most afterwards are brushing the pile back up and keeping leaves off it.
Once the surface is handed over, the routine is short but it does need someone to walk the site and look. Brush it against the lean of the pile so the fibres stand back up instead of lying flat along the line people walk — a stiff hand broom over a courtyard or a balcony, a power brush over a plaza or a long frontage. Rinse it when dust, droppings or spillage show, and lift leaves before they pack down. On a roof deck or a podium, clear the drainage outlets as well as the surface; a perforated backing still floods if the outlet below it is blocked. Top up the sand dressing where the pile has been walked hardest — entrances, doorways, the strip in front of the seating — and brush it in, so the fibre stays supported rather than crushed. Check the edge restraint once a season, because the turf is only as tidy as the line it is fixed to, and lift furniture rather than dragging it; wide pads under the legs spread the load and stop four small dents becoming permanent. In a shaded, damp courtyard a green film can appear on the surface — warm water with a mild detergent, brushed in and rinsed off, deals with it before it sets. Keep the approved sample and photographs of the finished seams. At handover they are the record of what was agreed; two seasons later they are what a repair or a repeat order is matched against. This is the whole maintenance load of artificial grass for landscaping — no mowing, no irrigation, no fertiliser — but it is a routine, not a promise that the surface looks after itself.
Other Turf in the Range
Model
Pile height
Surface character
Where it is used
QS073
8 mm
The shortest and tightest of the four, with almost no blade to catch a club or a foot, so the surface stays fast and true
soft putting greens and indoor practice surfaces
QS072
10 mm
Slightly more blade length than QS073 while staying firm and quick, and it takes repeated use without wearing a track where players stand
golf practice and durable putting surfaces
QS071
45 mm
Deep, springy pile that cushions a studded boot and stands back up after a turn
soccer field turf
QS070
45 mm
Cut to the same depth as QS071 but finished for open play rather than a marked pitch
outdoor multi-sport surfaces
Ordering and Delivery
Send the project details. The area in square metres, the site type, the colour direction, the destination port and the date you need the turf on site. As a landscape turf supplier we quote from those five points, so the more you can pin down, the faster the answer comes back.
Approve the shade on a sample. Ask your sales contact about sample availability and sign off the colour before the order is fixed. On 25 mm artificial grass the shade is the whole point of the model, and it is the one thing that cannot be adjusted once the yarn has been run.
Confirm quantity and mix. The minimum order is 2,000 sqm, which fills one container. An artificial turf wholesale order can mix landscape, golf and football models in the same load, so a distributor fills the container with a range rather than one roll. Pricing for this model runs from $1.50 to $5.00 per square metre and moves with specification, quantity and destination.
Place the order and arrange payment. We work on a deposit with the balance before shipment; the terms that apply to your order are confirmed on the invoice, and production does not start until they are agreed.
Production. Allow 7–15 days from the point the specification, quantity and packing are confirmed. Custom shade, roll length or labelling is settled before that clock starts — the usual production window for an artificial grass manufacturer working to a confirmed order.
Packing and shipping. Rolls are wound on cores and wrapped for the crossing, and the loading plan is shared before the container closes. Sea freight takes about 30 days, FOB or CIF depending on your terms, with the packing list, invoice and bill of lading prepared as the container leaves.
Warranty and after-sales. The turf is supplied with a 5-year warranty; what the term covers on your order, and how a claim is handled, is confirmed with your sales contact before you buy. Keep the approved sample and the inspection record — they are what any later question is checked against.
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
What materials are used in this artificial turf?
The pile is a PP and PE blend tufted into a PP net backing locked with SBR latex, with a curled brown thatch fibre worked into the base. That is what gives realistic artificial grass its body: polypropylene holds the blade shape, polyethylene softens the feel underfoot, and the latex keeps the sheet stable while water drains through it.
Can I choose the colour and the size of the roll?
Yes. Colour is made to your scheme, and rolls are cut to the dimensions your plan calls for, so a large area is laid in fewer pieces. Send the shade you are matching or the sample reference, plus the roll sizes, with your enquiry, and both are confirmed before production.
What support do you offer with installation and maintenance?
We advise on the specification before you buy — pile height, backing, dressing and the base build — and send a laying sequence with the order, along with the accessories the job needs: joining tape, adhesive, edging and the right infill. The laying itself is done by your own team or a contractor you appoint; in some markets we can introduce an installer, but we do not send a fitting crew.
How does this compare with the 30 mm landscape turf?
25 mm artificial grass gives the crisper, tidier surface, which is why it is the usual choice for decorative areas, frontages and terraces; the 30 mm model puts more pile underfoot and suits lawns and lounging areas where cushioning matters more than a sharp finish. For a private artificial grass garden the 25 mm is normally enough; where children use the lawn every day, the extra pile earns its keep. Both use the same PP and PE build, so the decision is about feel and traffic rather than construction.
What base does the turf need?
Most landscape artificial grass is laid on a compacted aggregate base graded to a fall, with the edges restrained. On a hard surface — a roof deck, a balcony, a covered terrace — it goes over a drainage mat or a suitable underlay, or is bonded down. Agree the build with your installer before the base is prepared; correcting it afterwards is the expensive part.
Can it be used indoors as well as outdoors?
Yes. The same roll covers indoor displays, showrooms and covered terraces as well as outdoor schemes, and it still reads as realistic artificial grass under display lighting. Indoors the base is the variable: a hard floor needs an underlay or a bonded installation, and a bonded floor is harder to change later than a loose-laid one.
How do I keep it looking new?
Brush the pile against its natural lean every few weeks on paths and entrance areas, rinse off dust and droppings, and lift leaves before they mat down. Marks usually come out with warm water and a mild detergent on a soft brush. Check seams and edges once a season, and keep sharp tools and hot objects off the surface.
Is it suitable for commercial landscaping projects?
Yes — artificial grass for landscaping is the main job for this model. Hotels, commercial frontages, show gardens, podium decks and public realm schemes use it because the surface stays uniform across a large area and the upkeep is a brush and a rinse rather than a maintenance contract. Distributors also use it as the landscape line in an artificial turf wholesale range, because it photographs well next to the golf and football models. For a pitch or a heavy sport surface, take the football or multi-sport turf instead.