A 10 mm blue court surface for padel and pickleball, tufted in PE yarn on a PP net and SBR latex backing and supplied on rolls. It is built as a racket-court surface rather than a pitch surface — short, dense and firm underfoot, which is exactly what these two games ask for. Court contractors, club operators and turf distributors buy it for new builds and for replacing worn acrylic or an older, tired turf.
Working alongside artificial sports turf manufacturers in Jiangsu, we keep the specification, the inspection and the export paperwork in one pair of hands, so what leaves here is what was approved before production. Most of the volume goes down as outdoor sports turf on a bound base, and it is ordered by the court rather than by the pallet: the buyer sends court dimensions and the line layout, and the order is produced around them.
Our buyers are contractors building padel and pickleball facilities, clubs resurfacing their own courts, and distributors stocking a court line for their region. All three want the same three things — a specification they can hold us to, a colour confirmed before the run, and rolls that arrive matching both.
Court Performance
Ball behaviour is the reason this pile height exists. A 10 mm surface takes very little energy out of the ball, so it stays low and predictable and travels at a steady pace — the quality players describe as a fair court. Sports artificial turf at this height plays quicker and firmer than a 40 mm or 45 mm football surface; the trade-off is less cushioning, which is why the base and any underlay are chosen together with the turf rather than after it.
Underfoot, the surface is firm and grippy. Padel is a turning game — players push off hard at the net and change direction in the back court — and a dense, short pile gives them something consistent to push against, so footing does not change from one end of the court to the other.
Colour holds through the seasons because the surface is finished with an anti-aging coating; ask for the current coating specification in writing so it can be compared against other quotations. Buyers moving wholesale artificial turf grass into their own market care less about any single roll than about repetition — the same shade, the same pile and the same backing from the first roll of a container to the last, order after order.
Backing Build and Structural Design
PP net bonded with SBR latex. The backing is a PP net set in SBR latex — the specification most artificial sports turf manufacturers run for court turf, and the line worth comparing between quotations. It is what keeps a roll flat once it is unrolled, and what stops the surface rippling after a hot summer.
Tuft lock through the full roll. Latex saturation grips each tuft at its base, so the sports turf grass holds its pile where players push off and slide. Loose tufts at a seam are almost always a backing problem rather than a yarn problem.
Water does not sit in the roll. The backing does not take up water, so a wet court does not soften or delaminate while it dries. Rain is handled by the base and its falls, which is why we ask for your base detail before the order is confirmed rather than after the container lands.
Stable under heat. A backing that creeps shows up first as a ripple along a seam. The latex layer holds the roll's dimensions, so seam lines stay straight through the season instead of wandering across the court.
Rolls that handle on site. Rolls are stiff and heavy when they come out of the container, so crews should unroll them, let them relax and trim afterwards. Cutting a cold, tight roll is how edges end up short at the fence line.
Clean edges. A latex-backed roll trims to a straight line without fraying, which matters where the surface meets glass, fencing or a kerb.
Body without stiffness. The roll carries enough weight to sit down on the base without lifting at the edges, while staying flexible enough to follow the falls of a court.
Applications and Venues
Padel clubs and commercial courts. Club-owned and pay-to-play facilities where the surface has to play the same on court one as on court four.
Pickleball and multi-use courts. The same pile is used for pickleball and for multi-sport areas that need one hard-wearing surface with a quick, true bounce.
Sports halls and covered courts. The roll goes straight into indoor facilities; what changes is the base, the fixing and the edge detail, not the turf.
Schools, clubs and hospitality venues. Daily use by players who are not gentle with the surface, and a maintenance routine one person can follow without specialist kit.
Court refurbishment and venue upgrades. Replacing a tired acrylic or a worn turf is the most common job we quote: the old surface comes off, the sub-base and falls are checked, and the new surface goes down to a fresh roll plan. Clubs adding courts to an existing site work through the same stages, and the same short-pile thinking carries over to our golf and putting surfaces where a venue is upgrading both at once.
Mixed-sport sites. Clubs that also run football or tennis can put the court element and an artificial grass for sports field area on one order — one shipment, one inspection and one set of documents.
Court contractors. Builders who compare artificial sports turf manufacturers want a roll plan, a seam layout and an inspection record they can file with the project; that is what the order is built around.
Distributors and wholesalers. If you stock wholesale artificial turf grass for your own region, we can hold an approved shade and specification so your next container matches the last one — and the range around it, from 8 mm soft putting green and 10 mm golf turf to 45 mm soccer field turf and 45 mm outdoor turf, can travel in the same load.
The turf uses premium PP and PE fibers in a tufted construction with a uniform 40 mm grass height and a pile density chosen for wear resistance and a natural look. Its 10,500 lbs turf weight helps hold dimensional stability under dynamic use, while the PP+net+SBR latex backing balances flexibility with structural integrity. Production typically runs 7 to 15 days.
The surface is engineered for consistent ball roll and comfort, with a balanced fiber composition that reduces maintenance and resists mat flattening in recreational and competitive use. Artificial turf suppliers can point to low lifecycle costs and warranty-backed quality assurance, while end users get authentic golfing performance that adapts to different environments and supports long-term performance in professional sports settings.
For sports clubs and recreational centers that need durable, visually consistent playing surfaces, this turf meets technical compliance for indoor and outdoor installation. It works as part of artificial turf putting green designs and integrates with existing drainage and underlay systems, so performance stays stable during peak use. Anti-aging features and a measured grass height support user satisfaction and fit typical facility maintenance protocols.
Commercial golf courses updating or building putting greens can use this turf where resilience, aesthetics, and playability are needed in high-traffic environments. The stable PP+net+SBR latex backing provides foundation support over varied substrates, and artificial sports turf manufacturers can use its technical advantages to streamline installation. Golf turf mats and custom color options can be matched to client design and functional requirements with minimal downtime.
Specifications
It meets relevant EU anti-aging coating standards for a longer service life and suits sports clubs, recreational venues, and commercial golf facilities. The turf is designed to fit into modern artificial sports turf manufacturers’ portfolios and performs indoors or outdoors, with customizable colors for branding and design. That makes it useful for facility refurbishments and new builds that need professional-grade golf turf mats or artificial turf putting green installations.
Plan the court with us first. Send the court dimensions, the base you are building and the line layout, and we return a roll and seam plan with laying notes before any artificial sport turf is unrolled. Sorting the layout on paper is the cheapest hour in the whole job.
Prepare the site. Clear the area, confirm levels and falls, and check access for plant and for the rolls themselves. A court built on a base that does not fall correctly will hold water no matter how good the turf is.
Build the base. Padel and pickleball courts typically sit on asphalt, concrete or a bound-aggregate base to the court engineer's design; the turf is only ever as flat as what is underneath it, so this stage is signed off before laying starts.
Measure and mark out. Set the playing and service lines from the court drawing, and mark the glass or fence positions so the surface can be cut in around them. Get this wrong and the lines end up off-centre with no easy way back.
Lay the turf. Unroll each artificial grass turf roll in the planned sequence, let it relax, trim to the plan and bond the seams with the specified tape and adhesive. Keep seam lines off the main play areas wherever the roll plan allows.
Dress the surface. Where the court design calls for it, silica sand is brushed in to settle the pile; rubber granules go on only for systems that ask for them. This is a far lighter dressing than a football pitch takes, and plenty of racket courts use none at all.
Brush, trim and hand over. Power-brush against the pile to lift it, trim the edges, then walk the court — seams, line edges, fixings and dressed areas. The sports turf grass should read evenly across the whole surface with no shadowing where rolls meet, and that walk is the acceptance check before the court goes back to the club.
Care and Maintenance Routine
Clear the surface each week. A leaf blower or a soft brush lifts leaves, grit and litter before it works down into the pile; do it more often under trees and around the court entrances.
Brush against the pile. Brushing a few times a season lifts flattened tufts and keeps the surface even. Unlike a natural lawn or a longer sports artificial turf, there is no mowing, watering or line painting in the routine — this is the whole of the regular work.
Top up the dressed areas. Sand migrates away from the middle of a court with foot traffic. Watch the centre first, because the sports turf grass there takes the most use and the dressing thins fastest; topping it back up keeps the pile stable and the bounce even.
Inspect seams and edges twice a year. Look for lifted edges along the glass or fence line and any loose tufts at a seam, and fix small faults before water gets underneath them.
Do a seasonal walk-round. Before and after winter, check the falls, clear the drainage outlets and brush out any area compacted by heavy use. Clubs running several surfaces — from padel courts to a full artificial grass for sports field pitch — usually fold this into one maintenance round.
Keep a short record. Note brushing dates, sand top-ups and any repairs; it makes year-on-year comparison easier and tells the next manager what the court has had done to it.
Ordering and Delivery
Minimum order
2,000 sqm (one container)
Production time
7–15 days, from confirmed specifications and an approved colour
Sea transit
About 30 days
Shipping method
Sea freight as the usual route, with road where the destination and order suit
Packing
Rolls wrapped and labelled; confirm any pallet or label requirements for your order
Colour approval
Confirmed against a physical sample before production
Warranty
Five years on this model; confirm the written scope with your sales contact
Samples
Ask your sales contact about availability and the current terms
Order type
Wholesale artificial turf grass, container volumes and single-project orders
Common projects
Padel and pickleball courts; other outdoor sports turf venues
Markets supplied
South America, North America, Europe and parts of Africa
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
What is this padel court turf made from?
The pile is PE yarn tufted at 10 mm into a PP net backing bonded with SBR latex, and the surface is finished with an anti-aging coating. PE is used because it holds a firm, springy tuft, which is what keeps the bounce consistent over a long season. When you compare this artificial sport turf against a PP or PP-PE blend, ask for the yarn and the backing on each quotation — those two lines explain most of the price difference.
Can you supply the turf in a colour to match our club or branding?
Yes. Blue is standard for padel and pickleball, and other colours are produced to order, so a club, school or venue can match its branding or the courts it already has. The same outdoor sports turf is used right across a site, so one approved shade can run through several courts. Colour is set on a physical sample before the run starts, because a screen cannot settle a shade, and we keep that approved sample on file for repeat orders.
Does a 10 mm court need sand infill?
Usually a light dressing rather than a deep fill. On padel and pickleball courts silica sand is brushed in to settle the pile and keep it standing; rubber granules go on only where the court system calls for them, and some systems use no dressing at all. That is a much lighter application than a football pitch or another artificial grass for sports field installation takes. Tell us the dressing your court design specifies and we will confirm what the roll needs before it ships.
Can the same turf be used for pickleball as well as padel?
Yes. Pickleball is played on the same short, firm surface, and the difference between a padel and a pickleball installation sits mostly in the line layout and the court dimensions rather than in the turf. Sports artificial turf at this pile height gives pickleball the low, quick bounce the game is built on. If you are fitting out a mixed facility, send both court drawings and we will plan the rolls together.
What roll sizes can we plan a court around?
Rolls are produced to the order rather than to one fixed size, so the court plan decides them. Send the court dimensions, the seam positions you can live with and any access limits for getting rolls onto the site, and we will come back with an artificial grass turf roll plan and a matching seam layout. On a standard court the aim is to keep seams out of the main play lines and away from the busiest part of the surface.
Is this also the right surface for a tennis court?
It can be, but tennis is normally quoted from our tennis range, which is built around a different pace and colour scheme. This artificial sport turf is specified for padel and pickleball first. Tell us the sport, the court dimensions and the speed of surface you are after, and we will say which pile height we would quote — the difference between the options reads small on paper and feels obvious underfoot.