A 10 mm cut-pile surface for the places where people practise putting rather than play a full round: a studio bay, a pro-shop corner, a hotel terrace, a school hall, or a garden strip a few metres long. This 10 mm artificial putting green turf is tufted in polypropylene on a tight 3/16 gauge, so the ball meets a firm, level surface instead of the soft spring of a longer landscape grass.
Working as an artificial putting green manufacturer, we supply this model to distributors building out a putting-green line, to contractors adding a practice area to a clubhouse project, and to academies that need the same roll to repeat across several bays. It replaces worn carpet-style mats and loose foam practice bases, and it sits well over a shock pad and edge trim where the green goes down on concrete.
Day to day the surface asks very little — a brush to lift the pile, a blower for leaves, and the habit of never dragging anything sharp across it.
- A roll that stays quick. Density is listed at 52,500 on a 10 mm pile, which is what separates high density putting green turf from ordinary short grass: the ball holds its line instead of losing pace in a thin, open surface. - Two-tone, upright blades. Darker and lighter green filaments stand up together with fine curled tips, so from standing height it reads as a realistic artificial putting green rather than a flat green mat. - Your colour, your label. Colour is customized on this model, and OEM artificial putting green turf orders can be produced to a nominated shade for a house brand or a club identity. - Handled by two people. Rolls are light enough for a small fitting crew to carry and position without a lifting frame, which matters in a first-floor studio or a hotel where access is tight. - Edges that stay put. The latex-bonded backing gives the roll a clean, stable cut line, so inlays, logo panels and perimeter trim sit flat instead of curling at the corner.




Face yarn. The pile is 100% polypropylene at 1,700 dtex, tufted at 3/16 gauge. PP is the practical choice for a putting surface: the filaments are fine and stiff enough to hold an upright cut, and they resist the matting that softer, thicker yarns develop where players stand in the same spot. A PP artificial putting green also keeps a crisp, low-friction feel under the ball rather than the deeper cushion of a landscaped lawn.
Backing. Three layers do three different jobs. A polypropylene sheet gives the roll its dimensional stability, so it does not stretch out of shape when it is carried, unrolled and re-trimmed. A laid-in net takes the pull at seams and edges, which is where a poorly built green fails first. SBR latex bonds the tufts into the sheet and holds the cut edge firm enough to trim cleanly.
The cut profile. Look at the roll from the side and you see a dense green pile over a dark, even backing — the mark of a uniformly tufted roll rather than a sparse one with visible gaps.
Consistency between rolls. Colour and pile are matched across a production run, so a green built from two or three rolls does not show a visible change where one roll ends and the next begins.
On site. Because the assembly is stable and comparatively thin, an artificial grass golf green built on this construction follows a slab, a compacted aggregate base or a timber platform without ridging at the joints.
Brushing. Run a soft power brush against the pile direction every week or so on a busy green, and less often on a private one. Brushing lifts flattened filaments and is the single habit that keeps the pace even across the whole surface; on a small bay a stiff hand brush does the same job.
Debris. A leaf blower clears grit, leaves and seed heads in a minute. Avoid a metal rake — it snags the filaments and leaves a visible track.
Spills. Blot coffee, sunscreen or bird lime with warm water and a mild soap, rinse and let it dry. Solvent cleaners and a pressure washer along a seam do more harm than the stain.
Wear spots. Repeated putts from the same place will eventually show a track, so move the marker and the tee positions every few weeks. Chair and bag legs left in one spot leave dents that recover slowly, so keep a pad under them.
Seams and edges. Check them once a year. A lifting edge should be re-glued straight away, because grit and water get underneath and the fault spreads along the join.
Outdoors. An artificial grass golf green left outside collects pollen, algae and moss in damp shade, so give it a brush and a wash with diluted mild detergent in spring. Frost and summer heat are not a problem; hot objects and sharp furniture legs are.
What not to do. No solvent-based cleaners, no metal rakes, no pressure washing along a seam, and no dragging bags or trolleys across a fresh install.
| Property | Specification |
|---|---|
| Model | QS018 |
| Pile height | 10 mm |
| Pile type | Cut pile |
| Face yarn | 100% polypropylene (PP) |
| Yarn weight | 1,700 dtex |
| Density | 52,500 |
| Gauge | 3/16 |
| Backing | PP sheet + laid-in net + SBR latex |
| Roll width | 2 m and 4 m |
| Roll length | Made to order |
| Colour | Customized |
| Warranty | 5 years |
| Production time | 7–15 days |
This 10 mm artificial putting green turf is quoted by the square metre, with listed pricing from US$1.20 to US$2.00 depending on specification and volume. The minimum order is 2,000 sqm, roughly one container; if you also buy landscape or pitch turf, ask whether your models can travel in the same load.
Production runs 7–15 days after specifications and colour are confirmed, and sea freight takes about 30 days to most destinations, so a project with a fixed opening date should allow for both legs before it sets the installation window. The model is listed with a 5-year warranty; confirm the terms that apply to your order.
Roll lengths are cut to your order, which keeps site waste down and lets a putting green turf supplier plan a layout with as few seams as possible across the putting line. Send your plan measurements and we will suggest a roll layout before production.
Colour is customized, and OEM artificial putting green turf orders can be produced to a nominated shade with your own labelling and packing.
For an accurate quotation we need the application, total area, preferred roll width, colour target, packing requirements and destination port. Ask your sales contact about sample availability before you commit to a shade, and confirm current pricing and lead time for your volume.
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.