This is a short, tightly packed putting surface built on polypropylene yarn, with the blades standing upright and close together across the full roll width. It is a fitted green rather than a roll-out mat: cut to the shape of the room or the practice bay and joined where the layout asks for it. We supply it as an artificial putting green supplier to indoor golf studios, pro shops, club practice bays and turf distributors, usually as a planned bay or a mixed range rather than a single roll. That changes how the order is handled — pile, backing, shade and roll plan are agreed first, then the roll is produced to that brief. Where a thin practice mat slides, creases and shows a wear line within a season, this surface is laid over a prepared base and fixed at the perimeter. Day to day it behaves like a green: brush it after heavy use, keep grit off it, and the line stays true.
Surface & Ball Roll
Even resistance across the roll. On this 10 mm putting green turf, the pile is packed at high density from selvedge to selvedge, so a ball meets the same surface wherever it crosses the bay instead of finding a soft lane that pulls the putt off line.
Yarn that springs back. Polypropylene recovers after a stance, a putter sole or a brush pass, so the surface does not stay flattened where players stand.
Consistent from one end of the bay to the other. Because the sheet is produced as one continuous run, an artificial turf putting green offers the same surface at the door as at the far end of the room.
No mowing, watering or top dressing to level it. The green is cleaned and brushed; it does not need the weekly programme a natural practice green demands.
Installation & Seam Planning
Prepare the site. Clear the area, remove soft spots and check that the sub-base is firm, level and free of debris. An artificial grass putting green laid over an uneven base will telegraph every dip through the surface.
Measure and mark out. Measure the space for the artificial turf putting green, mark the edge line, and decide where the joins will fall — away from the main putting line and away from the takeaway of a normal stance.
Lay the base. Compacted aggregate for an outdoor green, or a smooth panel and underlay system over a solid indoor floor, which is the usual base for indoor putting green artificial grass installations. The base carries the roll; it is not the place to save a day.
Lay the turf. Unroll the golf green artificial turf across the area, let the roll relax, then cut with an overlap and join with seam tape and adhesive suited to a PP-backed sheet. Keep the pile direction running the same way on every piece.
Dress with silica sand. Work a light silica sand dressing into the pile to settle it and hold the blades upright. A putting green takes a light dressing, not the deep rubber infill used on football turf.
Brush and finish. Brush against the pile to lift the fibres, trim the edges, fix the perimeter, and check that a ball rolls cleanly across every seam.
Accept the work and hand over. Walk the surface, test the roll from several angles, and agree who brushes and inspects it, and how often, before the bay opens.
Where It Fits
Indoor golf studios. A bay with a launch monitor needs a surface that reads the same on camera from every angle; this artificial turf putting green is specified for exactly that job.
Pro shops and equipment sales floors. A small putting area where a customer can test a new putter before purchase, sized to the shop floor rather than to a golf course.
Club practice greens and chipping bays. A dedicated putting line of golf green artificial turf beside the first tee or behind the clubhouse, used every day and maintained by the pro shop team.
Coaching and fitting rooms. A short, honest roll is easier to read when a coach is checking stroke and start line with a player.
Entertainment and hospitality venues. Mini-golf runs, hotel game rooms and simulator lounges where the surface is played hard and rarely rests.
Distributors and resale ranges. If you carry wholesale putting green turf for your own customers, this model fills the practice-green slot in a range built alongside the landscape and football lines.
Brushing & Daily Care
Every putting green turf manufacturer and artificial putting green supplier says the same thing about a short pile: it does not wear out, it lies down. Brushing is what stands it back up. Run a stiff-bristle or rotary brush across the surface against the pile once a week in light use and daily in a busy studio, and the green keeps the loft that makes a putt roll true.
Grit is the other enemy. Sand from shoes, rubber crumbs from the bay and ordinary dust settle at the base of the pile and dull the roll. A leaf blower clears loose debris in minutes; anything stuck comes out with a brush along the pile rather than scrubbed across it. Spills wipe up with water and a mild detergent — solvent cleaners can dull the yarn, so keep them off a golf green artificial turf surface.
Indoors the wear pattern looks different: stools, bags and monitor stands press the pile flat in the same places. Move heavy items every few months, put a mat under anything with metal feet, and keep the room's humidity steady so the backing does not take up moisture at the edges. An artificial grass putting green that is brushed and kept clean will hold its line far longer than one that is tidied only when it looks dirty.
Specifications
Property
Value
Model
QS025
Yarn material
Polypropylene (PP)
Yarn specification
1,700 dtex
Pile height
10 mm
Density
52,500
Surface
Short, dense pile with curled tips
Backing
PP net + SBR latex
Colour
Made to your shade
Form
Rolls, cut to your bay layout
Typical use
Putting greens, practice bays, indoor studios
Customisation
OEM/ODM to your shade and roll plan
Production time
7 to 15 days
Warranty
5 years
Related Models
Model
Pile height
Where it fits
8 mm Soft Putting Green QS073
8 mm
Softer practice surface, indoor rooms and hard floors
10 mm Golf Durable Artificial Grass QS072
10 mm
Hard-wearing golf practice and general golf use
45 mm Soccer Field Turf QS071
45 mm
Football pitches and school grounds
45 mm Sport Outdoor Turf QS070
45 mm
Outdoor multi-sport and recreation surfaces
Ordering & Delivery
Send the layout and the area. Give us the room or green in square metres, the shape of the bay, and the base you are laying onto, so the roll plan can be cut to suit.
Say how the surface will be used. Tell us whether it is indoor putting green artificial grass in a studio, an outdoor practice green beside a clubhouse, or both, and confirm the base it will sit on.
Production. Allow 7–15 days production once the specification and shade are confirmed.
Order basis. Our order basis is 2,000 sqm (one container). If you are building a wholesale putting green turf range alongside other turf models, give us the mix at quotation stage so the loading is planned in one go.
Shipping. About 30 days by sea, depending on destination port and sailing schedule. Packing and loading details are confirmed with you before the order leaves.
Warranty. The turf carries a 5-year warranty as stated for this model. Ask your sales contact what the cover includes — surface wear, colour retention, backing — so the terms are clear before you order.
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
How do I choose between the 8 mm soft putting green and this 10 mm high-density surface?
As a putting green turf manufacturer we supply both, so the difference comes down to how the room is used. The 8 mm soft model is the softer surface, chosen when players stand on a hard floor for long sessions and comfort matters most. This 10 mm high-density green is the firmer, faster option — the pile is short enough that the ball rolls close to the backing, which is what a dedicated roll line or a pro-shop green needs. If the room is used for indoor putting green artificial grass coaching and drills as much as free play, the softer 8 mm is often the better fit; for a studio fitting bay where the roll is the point, stay with the 10 mm.
Will it stand up to a commercial studio that runs all day?
Yes, provided the wear is managed in the right places. A dense short pile takes constant traffic well, but it compresses where people stand still — the same half-metre beside every bay. Plan the layout in panels so a worn section can be lifted and replaced without touching the rest of the green, and brush the stance areas as part of the daily close-down. We can supply replacement pieces cut from the same production run so a repair blends in; ask your sales contact to hold the roll reference with the original order.
What do the curled tips on the blades actually do?
The tips curl over slightly instead of ending in a sharp point, which gives two practical effects on a putting surface. The ball meets a rounded, springy edge rather than a spike, so it holds its line instead of being deflected by individual fibres. The curl also keeps the pile from splaying flat under light traffic, so the green looks even and reads cleanly under studio lighting. Every putting green turf manufacturer works with a range of tip profiles; this one is chosen for roll rather than for the deep, upright look of a landscape turf.
Can we have the green made in our own shade?
Colour is made to order rather than picked from a fixed stock list, so a shade can be set to your own reference or to the greens already installed in your venues. The shade is agreed in writing before production and kept on file, which is how repeat orders across a wholesale putting green turf range stay consistent. As an artificial putting green supplier we would rather spend an extra exchange at that stage than ship a green that reads one shade off against the bay next door.
Can it be laid on a rooftop terrace or a balcony bay?
It can, with the base and the edge planned properly. The PP net and SBR latex backing lets water pass through the sheet rather than sitting on it, so what matters on a solid deck is where the water goes next — build a fall towards a drain before the turf goes down. Fix the perimeter at the upstand so wind cannot lift an edge, and keep the fixing out of the putting line. An artificial grass putting green on a balcony behaves like any other fitted surface: the turf is only as good as the detail underneath it.