A putt reacts to the surface under it, and a short, dense pile is what makes a practice green feel true. This model is a 10 mm artificial grass putting green built from PP yarn at 1,700 dtex, with the curly yarn you can see in the close-up photographs: the blades stand up instead of lying flat, so the ball runs across the top of the pile rather than sinking into it.
The backing is a PP net locked with SBR latex. That combination holds every tuft where it was set and lets a roll be trimmed to a clean edge around cups and perimeters — useful when a green has to fit a shaped bay rather than a rectangle.
We deliver in rolls, in the colour and roll size agreed for your order. As a wholesale artificial putting green turf supplier we ship this model to indoor golf studios, pro shops, driving ranges and turf distributors who resell it by the roll.
It is a putting surface first. It is not the model for studs, dog runs or a garden lawn; the rest of our range covers those.
Specifications
- Curly PP yarn: the filament is texturised, so blades spring back after a ball or a shoe passes over them. On a pp artificial grass putting green that recovery is what keeps the surface looking even between brushings. - 10 mm pile at 1,700 dtex: short fibre with body. The ball stays on the surface instead of sitting down in the pile, which is the difference a golfer feels on the first putt. - 52,500 density: the tufts sit close together, so the surface reads as one plane rather than a row of separate blades. - PP net plus SBR latex backing: the net carries each tuft and the latex locks it, so a cut edge stays square. On artificial turf for putting green work, a square edge is what makes a tight, near-invisible seam possible. - Water sheds across the surface: the latex backing is a closed layer rather than an open mesh, so rain and wash-down water run off instead of through. Set a fall on the base and plan the drainage detail before the rolls go down; send us the base drawing and we will confirm it against the backing. - One production run per green: rolls made in the same run match each other far more closely than rolls from two separate orders, so order the full area at once.
8 mm soft putting green (QS073): the softer, thinner surface for indoor practice bays, junior coaching and home studios, where comfort underfoot counts for more than speed.
10 mm golf durable artificial grass (QS072): a tougher golf grass for driving-range bays and heavy-wear hitting areas.
45 mm soccer field turf (QS071): football pitches and school sports grounds, a completely different build.
45 mm sport outdoor turf (QS070): multi-use outdoor sports areas.
Coming back to compare: the models you have already opened stay listed with this one, so you can put 8 mm, 10 mm and 45 mm side by side before you settle on a direction.
Practice & Venue Applications
The most common home for this surface is the indoor artificial putting green: a studio with two or three simulator bays, a teaching bay where the coach wants a repeatable roll, or a shop floor where customers try a putter before they buy it. Indoors the turf sits on a flat, hard base, which is where a dense short pile delivers the most consistent roll — nothing soft underneath, no studs on it, and a surface that can be brushed back into line at the end of the day.
Outdoors it belongs on practice greens and chipping surrounds at clubs and driving ranges, where the area is small enough to keep clean and busy enough that natural grass would wear to mud around the hole. Pro shops use a single lane; academies use a full green that has to hold its line from morning to close.
Hotels, resorts and event venues lay a custom artificial putting green turf as a display green beside a terrace or a pool deck, where a natural lawn would not survive the traffic. Mini-golf operators use it where a short, consistent run matters more than contour.
In every one of those settings the surface is only as good as the base under it — the site work matters as much as the roll.
Putting is the job this roll was made for. At 10 mm with a dense tuft, the ball rides on top of the pile instead of settling into it, so a putt that leaves the face at the same speed reaches the cup the same way every time. Cups cut cleanly into a short pile and hold their shape, and a green of this density keeps its line through a full day of play. Where players want to chip as well, the picture changes a little. A short chip or a pitch of a few metres works well: the pile is firm enough that a wedge does not dig in and the ball lifts off cleanly. What this surface will not take is a full swing. The club strikes through the pile rather than the ball, and repeated contact scuffs the yarn and wears a visible line into the green within a season. Bear in mind too that a firm, dense pp artificial grass putting green gives less check than natural grass: the ball lands and runs out, so players learn a running shot rather than a spinner. Many studios use that honestly and coach the release instead of fighting it. If your players want both games, split the space rather than stretching one surface. Put the indoor artificial putting green at the far end and a longer golf grass at the hitting end, with a collar of the same yarn between them so the ball does not catch an edge as it runs on. Rotate the chipping spot along the hitting strip every few weeks, and brush the strike zone back at the end of a session, so wear spreads and the high density putting green turf keeps its even look.
Colour, Roll Size & Private Label
Colour to a physical reference: send a swatch, a yarn sample or a photograph of the green you are matching, and the colour is set before production. A custom artificial putting green turf order is signed off against that reference, not against a screen.
Roll size to your layout: tell us the bay or green dimensions and we agree a roll plan that keeps joins off the main putting line.
Your own label: roll wrap, label and packing list can carry your brand, which is how distributors take this model into their own market.
Samples before you commit: ask your sales contact about sample availability so you can check the colour and the pile in your own light.
Production video: ask for it if you want to see the yarn, the backing and the finished roll before you place the order.
Repeat orders held to the same build: as an artificial grass putting green supplier we keep the yarn, dtex and backing specification on file, so a second shipment matches the first.
Confirm the colour reference in writing before production starts. Colour is the one part of the specification that cannot be changed once the yarn has been run.
Lighting condition | What you see on the green | What to plan for --- | --- | --- Cool white LED (4000–6500 K) | The green turns cooler and slightly blue-grey, and a deep green can read almost black in the shadow under a bay divider | Approve the colour under the studio's own fixtures rather than in daylight, and lean to a mid-green if the room is lit this way Warm LED or halogen (2700–3000 K) | The yarn warms toward olive and yellow, and small differences between two rolls become easier to spot | Check the sample under warm light as well if the lamps may be changed later Daylight through glazing | The closest reading of the true yarn colour, and the harshest test of whether two rolls match | Look at the green at midday and again after dark on the same day Mixed daylight and downlights | Two greens in one room: seams and shade differences that disappear at noon come back at night | Keep one fixture type across the whole green and light the bays evenly Low light or a dark ceiling | Depth drops out of the surface and a light green drifts toward grey | Judge the sample at the dimmest hour the room is used, not under a work lamp Raking light across the pile | One panel reads lighter than its neighbour even when both are the same colour, because the fibre reflects the lamp at a different angle | Lay every roll with the pile running the same way and sight the finished green from the doorway players stand in Phone photo or monitor mock-up | Cameras and screens push green toward yellow or blue and cannot be signed off against | Settle the colour on a physical sample viewed in the room, then send that same piece back with the custom artificial putting green turf order as the reference
Installation Sequence
Prepare the site. Strip organic material, level and compact the sub-base, and set the fall the green will drain to. On an indoor artificial putting green this step is a flat, sound floor; outdoors it is a compacted base that will not settle under the surface.
Measure and mark. Mark the edge line, the cup positions and every planned contour on the base, and set out the seam lines at the same time so no join falls on the main putting line.
Lay the base material. Compacted aggregate or a prepared slab, blinded and checked with a straight edge. Any dip in the base will telegraph through a 10 mm pile within a season, so correct it now rather than later.
Roll out the turf. Unroll in the same yarn direction across the whole green, let the rolls relax flat before trimming, and stagger the seams.
Dress the surface where the specification calls for it. Putting greens are normally dressed with a fine silica sand; rubber granules belong to sports surfaces such as football turf, not to a putting green. Confirm the dress and the quantity against your own design before the crew starts.
Brush and trim. Brush the pile upright, cut edges and cups cleanly, and bond the seams. Artificial turf for putting green work lives or dies on the seam, so cut once, check the line, then glue.
Hand over and set the routine. Walk the green with the client, agree the brushing direction and frequency, and leave a simple inspection list for seams, edges and cups. We can introduce installers we have worked with in some markets — ask your sales contact — but the laying itself is done by your own crew or by the installer you appoint.
Care & Maintenance
Brush, don't scrub: work against the direction of play two or three times a week — daily in a busy studio — with a soft bristle head or a mechanical brush, and the pile stands back up where shoes have flattened it.
Lift debris before brushing: grit and leaves worked into a pp artificial grass putting green dull the surface and abrade the yarn, so take them off rather than pushing them down.
Rotate the cups: move hole positions every few weeks so wear spreads instead of concentrating into a shiny ring around the hole.
Check seams and edges monthly: a lifted edge is quick to re-bond; a seam that has been walked on all season is not.
Wash with water and a mild soap, then rinse and let it dry: keep solvents, bleach and abrasive cleaners off the yarn.
Keep heavy loads off the green: do not drag benches or equipment across it, do not rake it with metal, and do not hold a pressure washer close to the pile, which lifts fibre rather than cleaning it.
Watch the perimeter at the change of season: clear leaves and grit from the edges, check the fixing, and make sure the outlet the green drains to is open. A high density putting green turf that holds water in the wet months is telling you the base needs attention, not the surface.
Packing & Shipment
Every roll is wound on a core and measured against the order before it is wrapped. The wrap carries a label with the model, colour and length, so the crew can match each roll to the laying plan instead of guessing on site. Rolls going to the same green stay together on the loading list, so one bay never arrives split across two shipments.
A wholesale artificial putting green turf order usually travels with other models — landscape rolls, sports turf, a softer green for the studio next door — and the heavier rolls are loaded so the putting green rolls are not crushed underneath them. We photograph the packed rolls and the sealed container and can send the images out with the shipping documents.
On arrival, check the roll count and the labels against the packing list before anyone starts cutting. A roll that has been opened in the wrong place is far harder to put right than a label checked in the yard.
Ordering & Delivery
Send the brief for your wholesale artificial putting green turf order: the area in square metres, the site type, the colour reference, your destination port and the date the green has to open.
We reply with the roll plan, the container loading and a price per square metre between US$1.20 and US$2.00 depending on colour, roll size and volume. The minimum order is 2,000 sqm (one container).
As your artificial grass putting green supplier we confirm the colour reference and the roll plan with you in writing. Nothing goes into production before that.
Production time is 7–15 days from sign-off, with the rolls wound, wrapped and labelled as they are finished.
Rolls are counted, checked and photographed before the container is sealed, and the inspection images go out with the documents.
Sea freight is about 30 days by sea, plus clearance at destination.
Payment and trade terms are agreed on the quotation before production begins, and the 5-year warranty is set out on that same quotation.
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
Is PP yarn the right choice for a putting green surface?
For this kind of surface, yes. PP is stiff enough to keep a short pile standing, which is what gives a 10 mm artificial grass putting green its even roll, and it resists the flattening that softer yarns show under traffic around the hole. A high density putting green turf built this way also trims cleanly, so cups and edges stay sharp. The trade-off is firmness: PP at this pile height is a playing surface, not a cushion.
Can this turf be laid indoors as well as outdoors?
Both. Indoors it sits on a flat, hard base — a screed, a timber platform or another sound floor — and the closed backing keeps dust and spills on the surface where they can be wiped up. Outdoors it needs a compacted base with a fall to drain to. A pp artificial grass putting green of this density shows every dip in the floor, so check levels before the rolls come out of the wrapping. For an indoor artificial putting green in a smaller room, the 8 mm models are the lighter option.
Can you match the colour of our existing green?
Send a physical reference — a swatch, a yarn sample or a photograph taken in daylight — and we set the colour to it. Because the colour is fixed before the yarn is run, the reference has to be agreed in writing; a screen image alone is not enough, since monitors shift green considerably. If you are extending an existing green, send a piece of the original turf as well, so the new custom artificial putting green turf can be checked against the real surface rather than against a memory. For indoor installations, ask for the sample to be viewed under your own lighting before sign-off.
How does this compare with your 8 mm putting greens?
The 8 mm models are softer and thinner. They suit indoor practice mats, junior coaching and anywhere the surface sits on a hard floor and comfort matters more than speed. This 10 mm model is the denser, firmer option: more body under the ball, a more consistent roll across a larger green, and better recovery where players stand in the same spot. If the green is a showpiece or a teaching surface, take the 10 mm; if it is a practice mat in the corner of a studio, the 8 mm is the sensible buy.
What roll width and seam layout should we plan for?
Send the plan dimensions of the green and we will agree the roll size that covers it with the fewest joins. As your artificial grass putting green supplier we confirm that roll plan with the quotation, so the crew knows which roll goes where before the container is packed. Where a seam cannot be avoided, plan it away from the cup and off the main putting line, and allow trim at both ends.
Can players chip and pitch from this surface?
Short chips, yes. The pile is dense enough that a wedge does not dig in, and the ball lifts off cleanly. Anything beyond a short pitch is a different job: there is not enough pile to take a full swing, and repeated long shots will wear a line into the green. If your players want both, split the area — artificial turf for putting green work at one end and a longer golf grass for the full swing at the other.