Twenty millimetres is a working height rather than a showpiece height. It is deep enough for a lawn to read as grass from a few metres away, and short enough that leaves, grit and whatever a dog leaves behind stay on the surface where they can be picked up or rinsed away. That balance is why this 20 mm artificial grass turns up on garden lawns, shop frontages, roadside verges, terraces and pet runs far more often than the tall sports piles do.
The roll is a dense short pile in a bright, even green, with the blades set closely enough that the backing does not show through when you stand over it. Turn a cut sample over and the underside tells you just as much: a PP net grid under a layer of SBR latex, ribbed and slightly textured. That backing decides how the roll behaves on site — how it sits on a prepared base, how a seam closes, and whether a wet week leaves it flat or rippled.
Orders are usually built for a project rather than for a single garden: a contractor pricing a courtyard and a verge, an importer stocking a landscape line, a facility team replacing a worn patch. Sourcing from a wholesale artificial turf supplier that can hold a colour match across repeat deliveries matters more than how the first roll photographs, because a phased site that shifts shade between shipments is expensive to put right.
Use it where the surface is seen and walked on every day. For a competitive pitch or a heavily used sports field, the taller models in the range are the right tool; this one is intended for the everyday surfaces around them. It is widely used for landscaping commercial properties, rooftop gardens, and public green spaces where a low-maintenance, visually consistent surface matters. Waterproof and eco-friendly, it helps projects meet environmental and municipal water-conservation expectations, and it can be planned around irrigation and urban runoff systems. That flexibility across varied site conditions lets landscape architects and contractors deliver reliable, good-looking results indoors and out.
Backing and System Design
A turf roll is usually judged on its blades, but the layer underneath is what holds a project together. This model is built on a multilayer back: a PP net that carries the dimensional load, an SBR latex layer that locks the tufts in place, and the ribbed texture those two create underneath. The net is what keeps the roll from stretching out of shape when it is unrolled and pulled tight, which is the difference between a surface that stays flat and one that develops a wave along the edge.
The latex does two jobs at once. It bonds each tuft so a boot or a pair of claws does not pull fibres out one at a time, and it closes the back of the roll against water so the base below is not asked to absorb what lands on the surface. On a slope, a roof deck or a courtyard that gets hosed down, that combination is worth more than an extra couple of millimetres of pile.
The underside also gives adhesive something to grip. A seam is only as good as the bond beneath it, and a textured back takes seam tape and adhesive far more reliably than a smooth one.
What makes a genuinely pet friendly artificial grass is often the backing rather than the blade: a tight, closed back holds the tufts and does not trap debris in the pile. Whichever custom landscape turf supplier you buy from, ask for the backing specification alongside the pile height — two rolls that look identical in a photo rarely are.
Performance and Long-Term Value
Performance in this category is mostly about what the roll does not do. It does not stretch out of shape, it does not go bald in the middle of a walkway after one season, and it does not need a spring programme to keep it looking presentable.
Dimensional stability comes first. A 20 mm roll on a prepared base is held by its own backing, and the PP net resists the pull that comes from being stretched between fixings. That matters most on a wide open area where a single run of turf spans several metres and where summer heat will try to expand it.
The surface underfoot is firm rather than springy. A 20 mm pile takes a chair leg and a wheelbarrow without rutting, stays comfortable for bare feet at the door and does not swallow small wheels the way a long pile can. It is not a shockpad, and it is not sold as one — if the site needs impact absorption, that comes from the base build, not the turf.
Because this is outdoor artificial grass, the two things that age it are sun and traffic. Colour is held uniform across the roll and across production runs, and where a project runs in phases the reference stays on file so later deliveries can be matched. For a region with extreme sun, ask what UV data is available; that is a fair question for any supplier, and the answer should be specific rather than reassuring.
On value, the sum is straightforward: no mower, no irrigation, no reseeding and no annual renovation. What the surface does ask for is a brush and an occasional look at the seams, which is a fraction of the hours a lawn takes. Most of the failures we are called about as a wholesale artificial turf supplier turn out to be base and drainage problems, not fibre problems — the roll does its job when the ground under it was built properly.
- No mowing, no watering, no mud at the door — the surface stays green through a dry spell and does not churn into a mud strip where people cut the corner. - A pile short enough to keep clean — leaves, grit and waste stay on top of the blades instead of working down between them, so a brush or a hose does what a rake and a lost weekend used to. - Pet areas and planting from one roll — this is where the model earns its keep as pet artificial turf: the same pile runs from the garden into the dog run, so the green does not change at the boundary between them. - Colour made to the scheme, not pulled from stock — the green is produced to an approved sample, which matters when the turf has to sit beside paving, paintwork or a brand colour. - A specification you can write into a quote — pile height, yarn weight, density, fibre blend and backing are all stated, so the model can go into a submittal without a round of emails. - One specification list across a mixed site — buying from a wholesale artificial turf supplier keeps the pet area, the lawn and any recreation strip on the same colour reference and the same document.
Installation
Clear and prepare the ground. Strip the area back to a firm, clean sub-grade, take out roots and stones, and set levels so water runs away from buildings and paths. Agree where the surface water is going before anything else goes down.
Measure and mark the area. Set out the perimeter with a string line, check the diagonals so the shape is square, and mark where edging, kerbs or planters will sit. Measure the finished area in square metres rather than in rolls — the roll count follows the area, not the other way round.
Lay the base material. A compacted crushed-stone sub-base over a weed membrane is the usual build on soil; a slab or roof deck needs a different detail. For artificial grass for landscaping, the base is what the finished surface inherits: any hollow in it shows up as a dip in the turf within a season.
Lay the turf. Unroll and let the turf relax before fixing, then cut with a straight edge and pull the rolls tight. Keep the pile direction consistent across the whole area and stagger the seams where you can, so no long join runs across the main view.
Infill with silica sand and rubber granules where the specification calls for it. A light dressing of kiln-dried silica sand, and rubber granules on areas that take sport or heavy traffic, helps the pile stand up and adds weight. Brush it in against the lay of the fibre, and confirm with us whether your site needs infill at all — many domestic lawns do not.
Brush and trim. Brush the surface against the grain to lift the blades, trim the edges into the kerb or planter, and check that no fixing pins or cut edges stand proud of the surface.
Inspect and hand over. Walk the area, check seams, edges and drainage, and agree who holds the maintenance routine. A short written record of the handover inspection makes any later question much easier to settle.
Pet Area Surfaces
The right height for a run — 20 mm artificial grass is short enough that waste is easy to see and lift, and firm enough that a dog can turn on it without the surface rutting underfoot.
Blades that spring back — the PP component in the fibre gives the pile its memory, so a run that is used several times a day recovers instead of staying flattened in tracks.
Edges that survive digging — fix the perimeter properly, with a kerb, a timber edge or a buried edge detail. A loose edge is what dogs work at, and it is the most common reason a pet area starts to look tired.
Planned for washdown — the pet area should have its own fall and a hose point agreed with the installer before the base is compacted, so rinsing is a two-minute job rather than a bucket exercise.
Where these areas get built — boarding kennels, veterinary practices, dog day-care yards, breeding facilities and residential runs, including small rooftop or courtyard runs where a real lawn would never survive.
Still looks like a lawn — chosen well, a pet friendly artificial grass should read as garden from the kitchen window, which is why most of these areas are specified in a natural mid-green rather than a flat, uniform shade.
Landscaping and Public Realm
Landscaping work rarely stops at one surface. A scheme might need green in front of a building, a strip along a car park, a roof terrace and a border where mowing was always awkward. This 20 mm artificial grass for landscaping is the model specified most often at that middle scale — large enough to need a proper base, small enough that a crew can lay it in a day or two. Commercial frontage and verges. Entrance areas, showroom forecourts and the strips between a building and its car park are where a short pile wins: the surface stays tidy through a wet winter and nobody has to arrange a mower for a patch of grass the size of a van. Roof terraces and podium decks. Laid over a protected slab with the drainage path designed in, this roll gives a usable green roof garden without irrigation. Confirm the deck's load capacity and the outlet positions with the building team before the rolls are ordered, because both decide the base build. Parks, plazas and public green. Where a municipal or commercial space needs a consistent green surface that survives heavy footfall and hose-down cleaning, a dense 20 mm pile holds its appearance far longer than a thin decorative product. Beds, borders and weeding control. Around planters, tree pits and building edges, the turf closes off the ground and takes the maintenance burden out of narrow strips that were never easy to strim. Phased sites. On a scheme delivered in stages, colour continuity is the risk. It holds up in high-traffic sports venues, landscaped urban green zones, and multi-functional recreational areas, giving a consistent surface across heavy use. The same turf is also used for weed control and decorative planting around commercial and residential settings, lifting the look while cutting back on upkeep, and its realistic appearance makes it a practical fit for indoor as well as outdoor installations.
Sports and Recreation Surfaces
Training strips and warm-up zones — a marked-out area beside a main pitch, where the surface has to take repetitive drills without turning into a mud patch in February.
School yards and multi-use recreation areas — playground edges, seating areas and the informal green that a school wants to stay usable through the winter rather than closing for months.
Event and spectator lawns — the green around a clubhouse, a marquee area or a viewing bank, kept presentable for visitors without a grounds team on site every week.
Courtyard and rooftop recreation — small multi-use spaces on a slab, where a short pile is easier to lay, seam and clean than a long sports fibre and adds far less weight.
Where this model stops — a full-size competitive pitch is a different job. For outdoor artificial grass that takes studs week in, week out, the 45 mm soccer and sport models in the range are the correct specification, and they are built with that traffic in mind.
Keeping the greens consistent — clubs and contractors fitting out a whole venue usually come to a wholesale artificial turf supplier for the sports surface and its surroundings together, so the tones are chosen side by side instead of in two separate purchases.
Model | Pile height | Typical use QS073 | 8 mm | Putting greens and short-game practice QS072 | 10 mm | Golf and approach turf QS071 | 45 mm | Soccer field projects QS070 | 45 mm | Outdoor sport surfaces QS008 | 40 mm | Pet areas that want a taller, softer pile QS006 | 20 mm | Landscape and pet areas (this model)
Maintenance and Everyday Care
Brush or sweep regularly. A soft brush against the lay of the pile lifts flattened blades and moves leaves and grit to the edge; ten minutes a week keeps the surface looking newly laid.
Rinse and spot clean. Warm water and a mild detergent deal with most marks. Rinse thoroughly afterwards so no residue is left to attract dirt.
Handle pet waste daily. On pet artificial turf, pick up solids as soon as you can and rinse the area; a diluted, pet-safe cleaner once a week keeps odour down, and a dry surface is the most effective defence against smell.
Check seams and edges twice a year. Walk the perimeter, press the seams with a boot and lift any edge that has started to come away. Small repairs cost little; a lifted edge that fills with grit does not.
Top up infill where the site uses it. If the area was dressed with silica sand or rubber granules, check the level once a year and top up where traffic has pushed it aside.
Do a seasonal inspection before the wet months. Clear drains and outlets, check that water still runs off the way it was designed to, and note anything that has changed.
Avoid the usual mistakes. Do not pressure-wash close to the surface, do not use solvents or neat bleach, do not drag sharp-edged equipment across it, and do not park hot tyres on the pile for long periods.
Specifications
Property
Specification
Model
QS006
Pile height
20 mm
Fibre composition
PP + PE blend
Yarn weight
8800 d
Density
16,800 lbs
Pile type
Dense short pile
Backing
PP net + SBR latex
Colour
Customized to your approved sample
Water behaviour
Waterproof backing
Installation setting
Indoor and outdoor
Typical use
Landscape, pet areas, commercial green space
Roll size
Made to order to your cutting list
Production time
7 to 15 days before the sea leg
Ordering, Packing and Delivery
Confirm the area and the site. Send the square metres, the application and any other surfaces you are covering in the same phase, so the whole requirement is quoted on one schedule rather than as separate enquiries.
Confirm colour and specification. Colour is made to your reference, and pile height, density, backing and roll format are agreed in writing before production. As a custom landscape turf supplier we match to a physical approved sample, not to a screen colour, so approve a sample before the container is booked.
Minimum order: 2,000 sqm, which is one container.
Production: 7–15 days production once specifications and colour are confirmed.
Packing: rolls are wound on cores, wrapped and labelled. Confirm the roll width, roll length and any private-label requirement with your sales contact before production starts.
Shipping: about 30 days by sea. Confirm the destination port, the terms and the documents you need with your sales contact.
Warranty and follow-up: this model carries a five-year manufacturing warranty as stated for the specification. Confirm how that is handled in your market and who inspects the goods on arrival.
Mixed loads: pet artificial turf, landscape rolls and a sports surface can travel in the same container, which is how most mixed projects are shipped. Ask your sales contact about sample availability and current terms before you commit.
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
What materials are used in this turf?
Two polymers make up the blades: PP, which gives the fibre its memory so the pile springs back after foot traffic, and PE, which gives the softer, matte surface that reads as grass. This model runs at a yarn weight of 8800 d and a quoted density of 16,800 lbs. Underneath, the backing is a PP net bonded with SBR latex. Fibre blend, yarn weight, density and backing specification are the four things worth comparing between offers, whichever artificial grass manufacturer you are buying from.
Can I choose the colour and the specifications?
Yes. Colour is produced to your approved sample rather than pulled from stock, and pile height, density, backing and roll format can all be discussed against what the site needs. As a custom landscape turf supplier we would rather see the application and the surrounding materials before recommending a green, because a shade that looks right beside grey paving can look flat beside warm brick. Send the area, the colour reference and the roll size you want, and we will confirm what is achievable for your order.
How does the surface behave in rain and washdown?
The back of the roll is closed with SBR latex, so water stays on the surface until it reaches a fall rather than soaking straight through. That is what you want from outdoor artificial grass: the base stays firm, seams stay tight and the roll does not swell after a storm. The surface still needs somewhere for the water to go, so the base build and the fall matter as much as the turf itself. On a slab or a roof, confirm the drainage path before the rolls arrive.
Can one roll serve both a pet run and a landscaped garden?
Yes, and this is one of the models we quote for exactly that. The same short pile that reads as lawn on the approach works as pet friendly artificial grass in the run behind it, so the green does not change at the boundary. Plan the pet area with its own fall towards drainage so washdown is straightforward, and fix the perimeter edge properly so it cannot be lifted or worked loose.
Can it be laid over a concrete slab or a roof terrace?
It can, and this model is used that way on terraces, podiums and covered areas. The difference is the base: on soil you build a compacted sub-base with a fall, while on a slab you work with what the structure gives you, which often means a geotextile or a thin pad and a very careful check on where water will run. Artificial grass for landscaping on a roof also raises a load question for the building engineer, so confirm the deck can take the base, the turf and any ballast before ordering.
How visible are the seams between rolls?
On a dense short pile a seam is barely visible when it is done properly and very obvious when it is not. Lay the rolls in the same direction so the blade lean matches, trim both edges straight rather than trusting the factory edge, and use a seam tape and adhesive suited to a latex backing. A 20 mm artificial grass hides a good join better than a long pile does, because the blades do not fall across it. Keep an offcut from the same production run for future repairs.