Thirty millimetres is a popular pile height for garden and courtyard work: deep enough to feel like a mown lawn underfoot, short enough that chairs, planters and wheelbarrows do not disappear into it. This model, QS035, is a 30 mm artificial grass built for that setting — private gardens, enclosed courtyards, roof terraces and the softer edges of larger landscape schemes — with a dense upright face and a backing that stays flat through wet weather. As an artificial grass manufacturer, we supply it to landscape contractors, garden designers, property managers and turf distributors, often as part of a container that also carries sport and golf models. Most garden and landscape orders ship by the container rather than by the roll, so this model usually travels as part of a project order or a stock line. Send the site sketch or the roll sizes you need, the shade you have in mind and the date the surface has to be finished, and we will confirm what the production schedule allows before anything is booked. The turf uses high-grade PP and PE fibers in a dense 16,800 lbs density construction with a 20 mm pile height, balancing comfort with resilience. Its waterproof backing combines PP plus net with SBR latex for longer performance in wet conditions, and custom size and color requests can be produced within 7 to 15 days. The design is intended to meet performance requirements for artificial turf fields and landscaping projects where durability and low maintenance matter. The high-density synthetic surface and waterproof backing are designed to limit wear and hold structural integrity under heavy foot traffic and changing weather. It supports fast installation and lower lifecycle costs, while custom options let the turf match specific functional needs and long-term budget goals. For stadium settings, the turf is built to deliver surface uniformity, shock absorption, and consistent appearance, with drainage and durability suited to athletic field requirements. It can integrate with existing field infrastructure and maintenance routines, helping facility managers improve playing and viewing conditions without adding operational complexity.
Material & Build
PP + PE yarn. Polyethylene carries the colour and the soft handle; polypropylene adds tensile strength and helps the pile spring back after footfall. Blending the two is what gives this turf the realistic artificial grass look garden buyers expect, without the flat, plastic sheen of a single-polymer yarn.
A 30 mm face of curled and upright blades. The mix of denser, slightly curled filaments and straighter blades is why the surface reads as a lawn rather than a carpet, and why it lifts back quickly where a chair or a plant pot has pressed it down.
Tufts locked with SBR latex. The yarn is tufted through the primary backing and locked with latex. That bond is what stops tufts pulling out at cut edges and seams, and it decides how the turf behaves along the lines that get brushed most.
PP net backing for a sheet that stays flat. The net holds the roll square and stable, so it is easier to handle on site and less likely to ripple or shrink once it is down and exposed to heat and moisture.
Waterproof backing that sheds rather than soaks. The backing does not absorb water, so a roll stays light enough to carry and the surface does not go soft after rain. Surface water leaves through the base you prepare, which is why the sub-base matters as much as the turf.
Colour matched at production. Every landscape artificial grass order is matched to the shade you approve before the batch runs, so a repeat order for the same project or stock line does not arrive a shade off.
Green and settled from handover day. Natural lawn needs a season to knit together, and a new garden or sales suite rarely has that time. This 30 mm artificial grass arrives uniform in colour and pile, so openings and handovers happen against a finished surface rather than a muddy patch. Comfortable underfoot without feeling spongy. Thirty millimetres gives enough body to cushion bare feet and children's play without the softness that makes planters wobble and barrow wheels sink. For a family garden it lands in the middle: softer than a 20 mm commercial grade, firmer than a long sports pile. A dense face that closes up the joins. With the pile at 18,900 density, the face stands up to brushing and keeps its direction, so seams disappear and the realistic artificial grass surface reads as one piece across a courtyard or along a terrace. Made for wet weather and strong sun. The PP net and SBR latex backing hold the sheet flat as the seasons change, the yarn is stabilised for outdoor exposure, and the waterproof backing means a wet week does not leave the surface heavy or waterlogged. A model that sits easily in a range. It fills the garden slot between a 20 mm commercial grade and the 40 mm sports surfaces, so an artificial turf wholesale catalogue can cover most domestic enquiries with one landscape line instead of three pile heights. This turf fits stadium gardens, rooftop green spaces, sports and recreation areas, and custom commercial landscaping schemes. It helps lower irrigation and upkeep compared with natural grass, integrates into existing landscape systems, and supports sustainability goals and consistent appearance for indoor and outdoor use.
Where It Works
Family back gardens. This is where artificial grass for garden use takes the hardest knocks: children, pets, footballs and a trampoline. A 30 mm pile absorbs that traffic, hoses down after a wet weekend, and does not wear into a mud strip along the path to the shed.
Courtyards and enclosed patios. Small, shaded spaces where natural lawn thins out. The turf sits flat against edging, does not need sunlight to hold its colour, and fallen leaves lift off with a blower or a stiff brush.
Roof terraces and balconies. Weight and drainage drive the detailing here. The waterproof backing keeps the sheet clean and light to carry, and the finished level can be set against a gravel margin or pedestal edge — agree the build-up with the installer first.
Sales suites and show gardens. Realistic artificial grass gives a finished look on viewing day, months before planting would have filled out, and it keeps that look through a selling season without a maintenance visit.
Pet runs and kennel corners. The dense face stands up to digging and running better than a loose, long pile, solids lift off cleanly, and the area can be rinsed and left to drain through the base.
Stadium and venue gardens. Concourses, hospitality terraces and the planted strips around a pitch. The priorities here are surface uniformity, a consistent appearance from the stand and on camera, and drainage that copes with a crowd; we cut rolls to the drawn layout and keep one shade across the whole area so no panel reads differently under floodlights. This is the amenity turf around the venue, not the tested playing surface itself.
Commercial landscaping and public green space. Plazas, park edges, roadside verges and rooftop amenity decks. These schemes are usually judged on water use and maintenance cost, so the turf takes irrigation and mowing out of the specification while still working with existing planting beds, irrigation runs and drainage.
Distributor stock lines. If you are a landscape turf supplier building a catalogue, this 30 mm model sits naturally beside the 8 mm soft putting green, the 10 mm golf turf and the 45 mm soccer and sport outdoor surfaces, and all of them can travel in the same container.
The modular construction allows dimensions and colors to be adapted to each project, helping large installations fit precisely and look uniform. Using PP and PE fibers supports fiber stability and UV resistance, and the production process is set up to keep assembly efficient across artificial turf fields and urban landscaping work.
In commercial landscaping, the turf gives contractors a low-maintenance green surface that resembles natural grass, and its waterproof, durable build keeps performance steady across climates. It also works for rooftop and public recreation areas, where it can tie into irrigation and environmental control systems to reduce water use and support urban sustainability goals.
Specifications
Model
QS035
Pile height
30 mm
Yarn
PP + PE
Density
18,900
Yarn weight
8,800 dtex
Primary backing
PP net
Binder
SBR latex
Backing finish
Waterproof, ribbed underside
Colour
Made to order
Roll size
Cut to the width and length confirmed on your order
Main use
Artificial turf garden, courtyard and roof terrace projects
Infill
Silica sand and rubber granule dressing where the project specifies it
Installation in Seven Steps
Clear and prepare the ground. Strip the old lawn or surface, remove roots and stones, and set the finished level below the damp-proof course and below any paving edge. The area needs a fall so water leaves the surface — agree the direction and the fall with your installer before anything is delivered.
Measure, mark and plan the layout. Run string lines along the main edges, square the corners, and work out which way the rolls will run. Keep seams off the main sightline from the house or the entrance, and confirm the roll direction with your artificial grass manufacturer before you cut anything.
Lay the sub-base. A compacted aggregate layer with a weed membrane over it gives the turf a firm, free-draining bed. Depth depends on the use — a garden takes less than a terrace or a commercial area — so agree it with the installer rather than guessing.
Lay the turf and join the rolls. Unroll the turf in the planned direction, let it relax, then trim to the edges. Seams are taped and glued over a flat base; edges are fixed with pins, timber or a stone edge. For an artificial grass for garden job the aim is a surface that sits flat with no lip at the paving line.
Dress with silica sand and rubber granules. Where the specification calls for infill, spread silica sand and rubber granules evenly across the surface and work them into the pile. Infill weighs the pile down, helps it stand up and adds a little cushioning underfoot.
Brush and finish. Brush the whole area against the pile direction to lift the fibres, trim any stray edges, blow off dust and dress the perimeter. This is the step that turns a flat green sheet into a landscape artificial grass surface that looks laid rather than dropped.
Inspect, hand over and set the maintenance routine. Walk the area and check the seams, the edges and a few low spots for ponding. From then on the routine is simple: clear leaves before they mat, brush the pile a few times a year, rinse off spills and pet waste, top up the infill where it has worked down, and check the edges each season. Confirm at handover who is responsible for each of those checks.
Ordering & Delivery
Minimum order
2,000 sqm (one container)
Production time
7–15 days production after specifications are confirmed
Sea freight
About 30 days by sea
Supply basis
Artificial turf wholesale, container quantities
Customisation
Colour and roll size confirmed before production
Packing
Rolls wound and wrapped for the sea voyage; confirm your label and packing requirements
Loading
Different models can share one container — confirm the mix before booking
Account contact
One landscape turf supplier contact from quotation to loaded container
Warranty
Five years for this model — confirm the cover and the claim route with your sales contact
Payment terms
Confirm with your sales contact
Documents
Packing list and inspection record with each shipment; confirm any other documents you need
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
What materials is this turf made from?
The face is a PP + PE yarn tufted into a PP net and locked with SBR latex. The blend is deliberate: polyethylene brings the soft handle and colour depth, polypropylene adds strength and helps the pile recover, and the latex holds each tuft so cut edges and seams stay tidy. The backing is finished waterproof, so the roll does not take up water on site.
Can the size and colour be customized?
Yes. The shade is matched before production and the rolls are cut to the width and length your order confirms. As an artificial grass manufacturer we match the shade before the batch is run, so the turf you receive lines up with the sample you signed off. Send your layout or a roll list with the enquiry and we will confirm which widths keep waste down; on a repeat order, quote the previous shade reference so the new batch lines up.
How does a 30 mm pile compare with shorter or longer turf?
Thirty millimetres sits in the middle of the landscape range. It is softer and more forgiving underfoot than a 20 mm commercial grade, which is chosen where a dense, neat finish matters more than comfort, and it is shorter and firmer than the 40 mm and 45 mm surfaces used for football. For gardens, courtyards and terraces, 30 mm artificial grass is usually the balance buyers settle on.
How do I measure an area before ordering?
Measure the longest and widest points rather than assuming the space is a rectangle, sketch the shape, and mark where you want the seams to fall so they stay off the main sightline. Add a margin for trimming at the edges and for lining up the pile direction. Send the sketch with your enquiry and we will work out roll sizes for the artificial grass for garden area you are covering.
Will it look like real grass up close?
The face mixes curled and upright blades in more than one tone, which is what gives realistic artificial grass its depth; from a few paces it reads as a lawn, and close up you see the density of the pile rather than a flat sheet. Settle the shade first — ask your sales contact about a sample to check against the light where the turf will lie, because a courtyard and an open garden read very differently.
Is it suitable for pets and children?
Yes, with the usual site detail. The dense face takes play and light digging better than a loose, long pile, spills and pet waste rinse off, and water drains through the base beneath. On an artificial turf garden used by dogs, plan a rinse point near a tap and make sure the sub-base falls away from the house.
Can it go over an existing lawn or an old patio?
It can, but not straight on top of either. An old lawn is stripped and the ground re-levelled, because the turf needs a firm, free-draining base and a stable edge. Over an existing patio or concrete slab the surface is usually kept only if it drains and is sound, with the turf fixed and edged so it cannot lift — confirm the build-up with your installer before the area is cleared.