• famous artificial Turf Suitable for PP+PE Material Waterproof landscape turf  for new year,Qianshu Turf,famous artificial Turf  for PP+PE Material Waterproof
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof landscape turf  for new year,Qianshu Turf,famous artificial Turf  for PP+PE Material Waterproof
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year

25mm famous landscape turf with model QS030

No.QS030
$1.50-5.00
Download
View all downloads
  • famous artificial Turf Suitable for PP+PE Material Waterproof landscape turf  for new year,Qianshu Turf,famous artificial Turf  for PP+PE Material Waterproof
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year
  • famous artificial Turf Suitable for PP+PE Material Waterproof for new year,HealthLife,famous artificial Turf Suitable for PP+PE Material Waterproof for new year

Description

QS030: The 25 mm Roll Buyers Reorder

QS030 is the model that keeps coming back in the order book, and the reason is consistency rather than novelty. For a contractor finishing a scheme in two phases, or an importer keeping a wholesale artificial grass line on the shelf, that is the whole argument: nothing has to be re-approved. The surface is a working landscape product. It is specified as artificial grass for landscaping rather than as a sports surface — appearance, comfort and wear resistance first, with no ball roll or shock absorption to design around. It goes on courtyards, frontages, roof terraces, park edges and the grounds around a venue, and rolls are cut to the lengths your layout calls for.

Rolls of black netting wrapped in green and blue fabricWarehouse with stacked rolls of colored netting or fabric
Forklift loading red-wrapped rolls into a shipping container25mm famous landscape turf with model QS030

Where the Consistency Comes From

Every blade is a pp pe artificial turf filament: polypropylene gives it the memory to stand back up after a foot or a chair leg, polyethylene softens the hand so the surface is comfortable in bare feet. Either polymer alone leaves a gap — PP on its own can feel stiff, PE on its own flattens sooner — and blending them in one yarn is what keeps a walked lane recoverable with a brush.

Colour is spun into the yarn rather than printed on afterwards, and a brown thatch fibre is tufted through at a lower height. That is what makes realistic artificial grass convincing close up: the thatch breaks the flat green, and the blades are made in slightly different tones so a large lawn does not read as one printed sheet.

Underneath, a PP net holds the roll's dimensions and an SBR latex coating locks the tufts in and closes the sheet, so rain runs to the fall of your base instead of soaking up through the pile. Wear resistance comes from the density: 14,700 lbs over a 10,000 dtex yarn gives the pile enough body that planters, tables and steady footfall do not press permanent hollows into it.

As a landscape artificial turf supplier we finish this as a landscape surface, not a sports one. It is tuned for appearance and comfort, which is why it belongs in gardens, frontages and green space where nobody is measuring a rebound.

Roll Layout and Seam Planning

  • Roll lengths agreed first — dimensions are set from your drawing before production, so a large lawn is planned as a few runs rather than patched together from standard widths, and waste stays small.
  • Seams on straight lines — joints follow paving joints, kerbs and bed edges and stay off the main sightline, then tape and adhesive bring the two edges together without a ridge.
  • One pile direction — every strip is laid the same way round so light falls evenly and the finished lawn does not look striped from an upstairs window.
  • Edges fixed, never strimmed — the sheet is trimmed in at kerbs and edging and held at the perimeter, so nobody has to cut along the pile with a line trimmer later.
  • Cut and turn around obstacles — columns, drain covers and planting beds are worked around with turned pieces instead of small patches that show.
  • Deck and podium jobs — where the turf sits on a roof, load and drainage belong to the structure underneath; settle that build-up with your engineer before the roll plan is fixed.

Where This Turf Is Specified

  • Commercial frontages and office grounds — a green edge along the car park or the entrance that still looks cared for at the end of a dry month.
  • Residential lawns and shared courtyards — a level, walkable surface where mowing, watering and re-seeding stopped being practical.
  • Roof terraces and podium decks — artificial grass for landscaping that turns a hard, unused deck into an outdoor room people actually sit in.
  • Parks, medians and plaza edges — schemes where the green has to hold its colour through the season with no crew on site.
  • Hotel gardens, show areas and venue surrounds — close-up ground where realistic artificial grass is seen from a metre away and the finish has to carry the scheme.
  • Pet runs and kennel yards — the same sheet rinses down and dries off, which is why this model also ends up in animal areas.

Technical Data

PropertyValue
ModelQS030
Pile height25 mm
YarnPP + PE blend
Tuft density14,700 lbs
Yarn weight10,000 dtex
Primary backingPP net
CoatingSBR latex, waterproof
Pile finishGreen blades with brown thatch
ColourMatched to your approved sample
Supplied asRolled sheet
Typical useLawns, courtyards, roof terraces, venue surrounds

Laying the Turf, Stage by Stage

  1. Clear and level the ground. Strip the old surface, take out roots and stones, and check levels and fall across the whole area — water has to leave the site, and the base decides where it goes.
  2. Set out and mark the area. Square the corners, mark the edges and decide where the seams will fall before anything is cut, keeping them off the main sightline and out of the busiest walking route.
  3. Build the base. Compacted aggregate over a geotextile separator is the usual build for landscape work; a bound or concrete base is the choice where the surface will be swept mechanically or carries vehicles. The final level is set here, and it is the one thing that cannot be corrected later.
  4. Lay the rolls. Unroll in the direction the turf was manufactured, let it relax, then pull each strip back to the seam line and trim the edge straight so the blades run the same way across the whole area.
  5. Join the strips. Fold both edges back, insert joining tape, apply the adhesive and bring the edges together without stretching the pile; weight the seam until the adhesive has cured.
  6. Brush in silica sand and rubber granules where the specification calls for them. Dry silica sand goes into the pile first, then a rubber granule layer where the site needs extra stability, worked in with a power brush rather than tipped in heaps.
  7. Brush up and hand over. Power-brush the whole area against the pile, trim the perimeter into the edging, walk the surface with whoever will maintain it and agree the brushing routine before the crew leaves.

Care Through the Seasons

  • Brush against the pile — a power brush or a stiff hand brush worked against the lay lifts flattened lanes and keeps the thatch standing.
  • Clear debris before it mats — leaves, twigs and wind-blown sand left sitting through a wet season flatten the pile and stain the surface.
  • Rinse it down — a hose lifts dust and pet waste off the pile so it can move away through the base; let the sheet dry before heavy use.
  • Top up infill where it is used — check the level once a year and add sand or granule to the lanes that take the most traffic.
  • Watch the edges and seams — weeds show at the perimeter first, and a lifted edge costs little to correct early and a lot later.
  • Keep the tools sensible — soft or medium brushes only; a wire broom or a pressure jet held close to the pile pulls fibres and opens the backing.

From Order to Delivery

  1. Send the total area, the intended use, the base type, the destination and the date you need the turf on site — with those we can plan rolls and price the job against a real layout.
  2. Confirm the shade and the roll lengths against your approved sample before production. As a custom artificial turf manufacturer we set colour, roll dimensions and quantity from your drawing, so the delivery matches the way the site is actually laid.
  3. Production takes 7–15 days after the colour and specification are signed off. Custom shade and custom roll sizes sit inside that window rather than adding a stage.
  4. The order basis is 2,000 sqm (one container). Wholesale artificial grass buyers often fill the load with more than one model — a putting green, a golf surface or a football construction can travel with this roll.
  5. Transit is about 30 days by sea, and the packing list and shipping documents are prepared for your broker.
  6. Every order carries our five-year warranty term. Ask your sales contact what the cover includes for your site and conditions.

Quality Control & Inspection

Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.

FAQ

Why does a repeat order match the first container?

Because pile height, yarn and shade sit in one fixed specification and are checked against the approved sample at the start of each run. A second order of this 25 mm landscape artificial grass is produced to the same standard as the first, so a scheme finished in two phases does not show a shade step where one delivery ends and the next begins. The sample you approve is the reference held for the run.

Which yarn and backing are used in this roll?

The pile is a pp pe artificial turf — polypropylene and polyethylene blended in one yarn — tufted into a PP net primary backing coated with SBR latex. Density is 14,700 lbs over a 10,000 dtex yarn, with green blades and a brown thatch at 25 mm. The latex locks the tufts in place and closes the sheet, which is what makes the backing waterproof.

Can the colour and roll lengths be set to my scheme?

Yes. Working as a custom artificial turf manufacturer, colour is matched to your approved sample and roll lengths are set from your layout, so a large lawn is planned as a few runs instead of standard widths. Send the outline, the shade reference and the lengths you need, and confirm both against a physical sample before bulk production starts.

How do I clean the surface after pets or a wet season?

Pick up solids first, then hose the area down so dust and residue lift off the pile and move away through the base. Let the sheet dry before heavy use and brush the pile back up once it is dry — that is the whole routine on this realistic artificial grass surface. A soft detergent helps on a stubborn patch; a pressure jet held close to the pile will pull fibres and open the backing.

Will the backing cope where the ground stays damp?

The backing itself is closed — PP net with an SBR latex coating — so water does not wick up through the sheet and the turf does not go soft in a wet season. Water still has to leave the site through the base: if the sub-base ponds, the turf will sit in it. Check the fall and the drainage of the base before laying, and the backing does the rest.

What base does the turf need under it?

For most artificial grass for landscaping work, a compacted aggregate base over a geotextile separator is the usual build; a bound or concrete base is used where the surface will be swept mechanically or carries vehicles. The base carries the level and the drainage, and neither can be corrected once the turf is down. Tell us what the turf is going onto and we will confirm the build-up that suits it.

Leave a message
FirstName*
LastName*
Email*
Message*
Verification Code*
Click to verify