Blue turf gets bought for one of two reasons: a pet area that should look nothing like a lawn, or a court, play zone or feature where the colour is part of the design. This roll serves both. The pile stands 25 mm high in a polypropylene and polyethylene blend, tufted densely into a black PP net backing sealed with SBR latex, so it keeps its footing on a prepared base and drains through instead of puddling.
The blades are curled along their length rather than left straight, which gives the surface a springy, low-sheen finish instead of the flat shine of budget turf. From the far side of a court it reads as a soft blue field; close up it is plainly a manufactured surface, which is what it should be.
Model QS001 is the standard 25 mm build. As a blue artificial turf supplier we run it as a standing shade and as a made-to-order colour: the exact blue, the roll length and the labelling are set before production starts, so a club, a school or a landscape scheme can carry one shade across every roll in the delivery.
- Blue with depth, not a flat coat. Curled blades catch light at different angles, so the surface changes with the sun instead of reading as one printed blue. - Reads as grass from standing height. A curled pile and a low sheen give this realistic artificial grass a soft, springy look beside paving, planting or a fence line. - Comfortable under paws. As pet friendly artificial grass, the 25 mm pile gives dogs enough give to turn and dig without scuffing straight down to the backing. - Clean with a brush and a hose. Mud, leaf litter and pet waste lift off, and there is no mowing, edging, watering or re-seeding to schedule. - Works indoors and out. The same roll suits a covered terrace, an indoor play area or an open court, so there is no separate product line to stock for each. - One shade across a whole delivery. Every roll for a project is produced to the same agreed blue, which is what makes a phased installation look continuous. The modular construction allows dimensions and colour variants to be customised for a precise fit and uniform appearance across large installations, while the PP and PE blend supports fiber stability and UV resistance. This supports efficient assembly and consistent results for artificial turf field builds and urban landscaping projects.




A turf surface is only as good as the two layers nobody sees from standing height: the yarn and the backing.
The yarn is a polypropylene and polyethylene blend. Polypropylene gives the blade its memory, so the pile springs back after a boot, a paw or a brush instead of lying flat, while polyethylene softens the hand and carries the colour. Curling the blades along their length keeps the pile open and dense rather than letting it flatten into a shiny sheet after a season of use.
Underneath, the tufts are locked into a black PP net with SBR latex. That does two jobs at once: it holds each tuft where it was punched, so the pile does not pull out along a seam, and it gives the roll enough dimensional stability to lie flat and stay flat once it has relaxed on site. The latex also closes the back against moisture, so rain and wash-down water travel through the pile and across the backing to the fall built into the base instead of sitting in the fibres.
Because this 25 mm artificial turf is a net-backed build rather than a thin felt, it has enough body to sit over a properly compacted sub-base in most landscape, play and pet applications. Whether you need an underlay or a shock pad on that base depends on the use — agree it with your installer and with us before the rolls ship.
Most of what decides whether this 25 mm artificial turf still looks right in three years happens after the first month.
Traffic. A pet run, a playground or a court takes hundreds of crossings a day. The pile compresses underfoot and recovers; what it does not like is a heavy static load in one place, so move benches, planters and goal frames when the area is maintained and the surface will not take a permanent print.
Wet weather. Water passes through the pile and runs across the latex face to the drainage built into the base, so the area is usable soon after rain rather than holding a puddle. For pet friendly artificial grass this is the paragraph that matters most: a run that drains is a run that can be cleaned and used again the same day, which is the difference between one wet week and a lost fortnight.
Damage. A scorch, a cut or a chewed corner does not mean a new surface. A panel can be cut out along the seam line and replaced in the same pile direction, which is one reason to keep the seam plan and roll direction on file after handover.
Cost over time. There is no mowing, watering, feeding or re-seeding to schedule. For a facility with a maintenance contract the routine shifts from weekly cutting to occasional brushing and inspection, and that is where the running-cost case is made.
What to watch. Loose edges, a lifted seam, a low spot holding water. Each is a small fix caught in the first season and a bigger one if it is left, so a ten-minute inspection after the first wet winter tells you more than the handover day did.
A playing area inside a green surround. Blue marks the pitch or court and green carries the run-off, so the boundary reads without a line of paint. The join between the two colours is planned as a seam, laid on the line, and the two rolls are run in the same pile direction so the edge stays crisp.
An inset inside paving. A rectangle of blue set into stone, cut tight to the edge and brushed up against it. Where the pile meets the paving the surface has to read as realistic artificial grass rather than carpet, which is why the trim sits just below the hard edge instead of on top of it.
A boundary band along a path or fence line. A narrow run of blue against a green field gives a walkway or a perimeter a visible marker without signage, and it is cost-effective to repeat when a site is extended.
A team or house colour on a school site. Blue carries an identity that green cannot, and the same shade can run from a court through to a quiet corner without a second product line.
A pet run kept visually distinct. Colour tells staff and visitors at a glance which surface is the working run and which is the lawn, which matters in a boarding or day-care setting where doors are opened and closed all day.
A branded entrance or event floor. A colour block at a reception, a terrace or a stand is laid and lifted without groundwork, and it can be produced to a brand reference rather than picked from a card.
- Multi-use courts and games areas. Blue gives a court a defined identity and separates the playing area from its surroundings far better than green on green, and the surface takes cleats and daily bookings without a rest period. - School and nursery play areas. Soft enough to fall on and dense enough to survive break-time traffic, with no mud to manage at the door on a wet Monday. - Pet runs and boarding facilities. What the operator gains is turnaround: a surface that hoses down, drains and dries means a run can be cleaned between animals instead of being taken out of use. - Rooftop terraces and covered walkways. The waterproof backing and flat-lay roll suit a slab where the drainage and the load have already been worked out. - Commercial, hospitality and event features. A branded colour block, a photo backdrop or a courtyard floor — an artificial turf garden installed for a season or for good, with no watering to arrange. - Replacing worn or waterlogged lawn. Where grass has failed under shade, dogs or footfall, an artificial grass landscaping build removes the problem rather than re-turfing it every spring. - Phased outdoor schemes. Because the colour is produced to order, a later phase can be matched to the earlier one instead of settling for close enough. The turf uses high-grade PP and PE fibers in a dense 16,800 lbs construction with a 20 mm pile height, and its waterproof backing combines PP plus net with SBR latex for wet conditions. Production timelines range from 7 to 15 days, and the design is intended to meet performance standards for artificial turf field installations and landscaping projects that need durability and maintenance efficiency.
Stadium garden covers everything around the pitch rather than the pitch itself: the planted and paved areas at the turnstiles, the hospitality terraces, the concourse edges and the landscape strips that dress the outside of the ground.
Here the blue has neighbours. A venue's colour already appears on signage, seating and cladding, so the turf shade is agreed against those elements rather than chosen in isolation — a blue that sits a tone off the seating is immediately obvious from the approach.
Installation follows the venue calendar, not the other way round. Concourses and forecourts have to stay open on match days, so the work is planned in windows — a gate at a time, a stand at a time — with rolls cut to the section being laid and deliveries booked for the quiet days. That sequencing is agreed before production so each phase arrives ready to lay rather than being trimmed on site.
Exposed concourses are windy and heavily walked. Edge restraint, a properly compacted base and seams kept off the main walking line matter more here than on a sheltered lawn, and cleaning after an event is a brush and a blower rather than a wash-down.
Drainage is usually already designed into a stadium surround. Tell us the levels when you ask for the quote and we will advise on roll direction, seam placement and how the turf should meet the existing outlets, so the new surface works with the fall instead of fighting it.
| Specification | Detail |
|---|---|
| Model | QS001 |
| Pile height | 25 mm |
| Fibre | Polypropylene (PP) and polyethylene (PE) blend |
| Density | 16,800 |
| Yarn weight | 8,800 d |
| Backing | PP net with SBR latex |
| Standard colour | Blue |
| Custom colour | Yes, produced to an approved shade |
| Pile style | Curled, upright blades |
| Water behaviour | Backing resists moisture; water passes through the pile |
| Typical use | Pet areas, play zones, courts, decorative landscaping |
Blue is rarely a stock decision, so treat the colour as a specification rather than a choice off a shelf.
We start from your reference — a physical swatch, a club or brand colour, or a code you already work to — and build that shade into the yarn for the run. If the blue has to match an existing surface, a previous order or a painted element on site, say so when you request the quote; matching against a sample is far more reliable than matching against a photograph on a screen.
Size is equally open. Roll width and length are set to the layout you send, which cuts waste on regular shapes like courts and runs and reduces the number of seams a crew has to close. Send the plan with the usable dimensions marked and we will come back with a roll breakdown.
As a custom artificial grass manufacturer we also handle the branding end: labels, packaging and OEM presentation can be produced to your own brand rather than ours, which suits distributors building a catalogue and contractors handing over a finished facility.
Two practical notes. Approve the shade against a physical sample before bulk production begins, because screens and print shift blue more than any other colour. And if a project will be installed in phases, order the full quantity in one run so the later phases match the first. The high-density synthetic build and waterproof backing are intended to limit wear and hold structural integrity under heavy foot traffic and varied weather, supporting rapid installation and lower lifecycle costs. Custom specifications help align the turf with functional requirements, supporting return on investment and reduced long-term maintenance for indoor-outdoor use.
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.