A 50 mm pile puts this football field artificial turf at the top of our range, and that extra length is what most buyers are paying for. More fibre above the backing means more depth for the infill to work in, a softer landing when a player goes down, and a surface that holds a stud instead of letting it skid. Every artificial turf soccer field built on this construction is aimed at grounds that see regular match play as well as daily training: stadium pitches, club training centres and multi-pitch sports complexes where the surface has to behave the same in week forty as it did in week one.
We supply it as a complete infilled system — rolls, backing, infill and line layout planned together — so what arrives on site matches the playing characteristics the project was designed around. Buyers usually order wholesale artificial turf grass by the container: distributors building out a football line, contractors fitting a new pitch, and facility operators replacing a worn natural-grass field. The specification is fixed before production, so every roll in the order behaves the same way.
Fiber and Backing Construction
The face is a PP and PE blend rather than a single polymer, and the reason is practical. Polyethylene gives the blade its softness and its muted, natural-looking green; polypropylene adds the stiffness that makes the fibre spring back instead of matting flat under repeated stud traffic. Blended this way, an artificial grass soccer field keeps a consistent pile across the whole playing area, which matters when a player's footing changes from one end of the pitch to the other.
Underneath, the backing is built in three passes: a polypropylene carrier cloth, a reinforcing net and an SBR latex coating that locks the tufts in place. The net takes the tensile load when the rolls are unrolled and when the surface moves in heat; the latex holds the stitch so fibres are not pulled out during brushing or an infill top-up. The same construction gives water a defined route down through the pile and out through the backing, so a heavy shower drains away instead of sitting on the surface.
Production runs with established artificial sports turf manufacturers, and every order is held to an approved physical sample for yarn, colour and backing before the rolls are wrapped. That is what keeps a second container, ordered a season later, sitting alongside the first without a visible difference on the pitch.
Product Advantages
Depth that softens a landing. Fifty millimetres of fibre over the backing gives the infill somewhere to sit, so a fall is absorbed through the pile rather than stopped by the base. - Blades that stand back up. The PP and PE blend recovers after play, so the pitch does not develop flattened lanes down the middle or bald patches in the goalmouths. - A backing that keeps seams closed. The carrier, net and latex layers hold their dimensions through heat and rain, which is what stops a joint from opening in the second season. - Infill that stays where it is placed. The open 50 mm pile takes quartz sand and rubber granulate evenly and holds it, so the surface does not go thin at the edges where players turn most. - Grip under a stud. Fibre angle and infill depth let a boot bite and release, which is what a player feels as confidence on a turn. - Cushioning spread across the pitch. Pile and infill work together so an artificial grass soccer field feels the same in the centre circle as it does near the corner flag. - Resistance to compaction where it matters. Goalmouths, the centre circle and the technical area take the most repeated traffic; the blended fibre and a maintained infill depth keep those zones from packing down into a hard, shiny patch. - Colour and pile that hold through the seasons. Weather exposure is what ages a pitch first, and the face and backing are built to keep their appearance rather than going brittle or washed out early.
Site Preparation and Base Layers
Survey the site before any football field artificial turf is ordered. Confirm the finished pitch dimensions, the fall across the ground and where water will leave it; those three answers decide how the rolls are cut.
Set out the pitch and its run-offs. Mark touchlines, goal lines, technical areas and any second-sport markings with string lines and paint, then check the diagonals so the field is square before the base goes down.
Build the base to the sport, not to the turf. A compacted aggregate base suits most pitches; asphalt or concrete is used where the surface is shared with hard-court sports or crossed by heavy vehicles.
Fall and drain away from the playing area. A shallow, consistent fall towards the outlets keeps an artificial grass soccer field playable after rain — low spots, not the turf, are the usual cause of standing water.
Fix the edge restraints first. Kerbs, timber or concrete edges hold the perimeter and give the installer a straight line to cut against.
Hand over a clean, cured base. Sweep off loose aggregate and check the surface is dry and free of oil or cement residue; contamination shows through later as uneven infill depth.
Turf Installation Sequence
Unroll and acclimatise the rolls on the base in the direction agreed on the layout drawing, and let them relax before any cutting; pile direction should run the same way on every roll.
Overlap the edges, cut through both layers in one pass for a tight joint, then bond with seam tape and adhesive. A soccer artificial turf pitch is judged at its seams more than anywhere else — a lifted joint is the first thing a player notices.
Tuck and fix the perimeter into the edge restraints, keeping the pile direction consistent as you work around run-offs and corners.
Spread the quartz sand in passes, brushing it down into the pile between each one, so the base of the fibre is supported evenly rather than in patches.
Apply the rubber granulate over the settled sand the same way, brushing as you go, until the infill sits at the depth agreed for the pitch and its level of use.
Power-brush against the pile direction to stand the fibres up and level the surface, working out any infill high spots as you go.
Walk the finished pitch for pile height, infill depth, seam tightness, line accuracy and drainage, and record the result with the facility manager before handover.
The rolls are planned before they are cut. Where the layout allows, they run the length of the pitch so seams fall away from the main playing lines and the heaviest traffic, and joint positions are agreed against your drawing instead of being decided on site. That planning is what makes a soccer artificial turf pitch read as one continuous surface: fewer joints, straighter seams and no short offcuts working loose at the corners. The 50 mm pile also gives the installer room to brush infill in evenly and to work a seam without the backing showing through. Touchlines, run-offs, goal areas and any kerb or surround are set out first, so the turf is cut once and the waste stays low. The surface then has to fit the rest of the facility. This sports artificial turf works with standard quartz sand and rubber infill, with a compacted aggregate or concrete base, and with the edge restraints and drainage falls a contractor would normally design for a football pitch. Where a natural-grass field is being converted, the existing drainage, irrigation and lighting positions usually stay where they are and the turf is specified around them. Custom fibre coloration and density let a club match a house colour, separate two adjacent pitches, or follow a sponsor's palette.
Stadium and Competition Venues
Ball behaviour that stays readable. Consistent pile height and evenly brushed infill mean a pass runs at the same speed across the pitch, so players are not adjusting for a quicker or slower strip.
Fast turnaround between events. After a match the surface needs a brush and a line check rather than a rest period, which lets several fixtures run on the same pitch in one week.
Built for the perimeter, not just the middle. The turf cuts cleanly around run-offs, technical areas and permanent boards, and the backing copes with the extra foot traffic those zones collect.
Specification you can hand to a consultant. Pile height, fibre, backing and density are documented before production, so the specification from artificial sports turf manufacturers can go into a tender document without a late substitution.
One standard for the first team and the academy. A club that trains and plays on the same soccer artificial turf construction gets comparable footing across both squads, which helps when players move between them.
Community and Education Venues
School and municipal buyers come at a football field artificial turf specification from a different direction to a professional club. The budget is approved once and has to last, the users range from six-year-olds to adult leagues, and the upkeep will be handled by a small grounds team or a contractor on a schedule. The surface also has to survive being used as a playground, an assembly area and a community hire space, often in the same week.
Fifty millimetre artificial grass suits those sites because the extra pile gives the infill more room to cushion a fall, which matters when the players are children and the surface doubles as a playground. The same depth makes the pitch tolerant of mixed use — five-a-side, athletics practice, general recreation — without the middle of the field breaking down first.
Where a site is shared with another sport, the turf can be specified with a neutral colour and a plain layout, or marked for a second sport at the planning stage, so one pitch carries football, PE and community bookings without a second surface.
Football is not the only thing that happens on these pitches. A stadium may host a match, a training session and a community hire in the same week; a school needs a surface that survives PE lessons, weekend leagues and summer camps; a municipal park has to stay open through a winter that would ruin a natural field. Football field artificial turf takes the renovation window out of the calendar, and for most operators that is worth more than any single material property. The pitch also stops behaving like a crop. There is no growing-in period, no irrigation schedule, no fertiliser or weed programme and no annual close-down for re-seeding, so bookings can be sold right through the year. Water and chemical use drop sharply, and the work that remains can be planned around fixtures instead of dictating them. For buyers ordering wholesale artificial turf grass, that predictability is the commercial point: the surface arrives as a specified building material on a known schedule, and the facility can commit to fixtures before the container ships instead of hoping the grass comes back in time.
Specifications
Model
QS015
Pile height
50 mm
Face fibre
PP + PE blend
Density
10,500 lbs
Yarn weight
10,000 D
Backing
PP + net + SBR latex
Colour
Customized to your reference
Form
Rolled turf, cut to project lengths
Infill
Quartz sand and rubber granulate
Main use
Football and soccer pitches
Supply origin
Nantong, Jiangsu, China
Handover and Maintenance
Handover is where the pitch becomes the operator's asset, so it is worth recording what new looks like. Note the infill depth at several points, the pile height, the seam positions and the drainage outlets, and take photographs. Those records become the baseline for every later inspection of a sports artificial turf installation, and they turn a warranty conversation into a factual discussion rather than an opinion. Walk the surface with the installer before signing: seams flat and closed, lines straight, infill even, no fibres trapped in the joints, and water gone from the low corner after a test spray.
Routine care for 50 mm artificial grass is light but not zero. Brush regularly — more often in the first few months while the infill is still settling — and top up quartz sand and rubber where traffic has pushed it aside. Keep the outlets clear of leaves and litter, check the seams once a season, and clear debris before it works into the pile. Two habits cause most long-term problems: brushing only the middle of the pitch and leaving the goalmouths and touchlines alone, and using sharp rakes or metal tools that drag fibres out of the backing. On shaded or humid sites, watch for algae or moss on the surface and deal with it early.
Ordering and Delivery
Minimum order: 2,000 sqm, which is one container. Colour and pile are fixed on a single approved specification, so the whole order comes off the same standard. - Production: 7–15 days, counted from confirmation of the specification, the colour reference and the order details. - Shipping: about 30 days by sea. The sailing and the final transit time depend on the destination port and the carrier's routing. - Warranty: 5 years, as stated for this model. - Quotation basis. Wholesale artificial turf grass is quoted per square metre against the confirmed specification; send the pitch dimensions, layout drawing, colour reference and destination port so the price and the container plan are accurate. - Packing and labelling. Rolls are wrapped and labelled for shipment; tell us at order stage if you need specific roll lengths, palletising or shipping marks. - Before the rolls are cut. Confirm pile height, colour, infill depth for your base and the position of any second-sport markings. Changes after production starts move the schedule. The rest of the range covers the other jobs a pitch or a training site usually needs. The 45 mm soccer field turf QS071 sits just below this model for clubs that want a slightly shorter pile on a community or training pitch, and the 45 mm sport outdoor turf QS070 is the general sports option where football shares the surface with other games. For practice areas, the 10 mm golf turf QS072 and the 8 mm soft putting green QS073 cover putting and short-game work beside the main field. All four can be discussed alongside this model when you are planning a multi-pitch site, or when one order needs more than a single surface type.
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
What materials are used in this football turf?
The face is a blend of polypropylene and polyethylene fibres, and the backing is a three-layer build of polypropylene carrier cloth, reinforcing net and SBR latex. Once the turf is laid, the pile is filled with quartz sand and rubber granulate, which is what gives the surface its firmness and its footing.
Can I customize the color of the football artificial grass to match my brand?
Yes. Colour is produced against the reference you supply rather than picked from a stock list, so club, school or sponsor colours can be carried across a pitch or a set of pitches. Send the reference with the enquiry and confirm it on the approved sample before production; the fibre and backing specification stays the same whatever shade you choose.
Do you provide support or guidance for installing soccer artificial turf in sports venues?
Yes. We go through the pile height and density for your level of play, the layout and seam plan, the base build-up and the infill depth with you before the rolls are cut, and we can review your drawings so the turf arrives matched to what has been built on site. The laying itself is done by your own team or a local installer; the planning and specification side is where we help most.
How does the 50 mm pile compare with your 40 mm and 45 mm football turf?
The 50 mm pile is the deepest and softest of the three, and it is what we suggest where a pitch carries a high standard of play plus regular training, because the extra depth absorbs impact and lets the infill work properly. The 40 mm and 45 mm models use less fibre, which makes them the usual fit for school, community and multi-use pitches. Tell us the weekly hours, the age of the players and whether the field is hired out, and we will point you to the right option for your artificial turf soccer field.
What infill goes into the turf, and how is it applied?
Quartz sand goes in first and is brushed down into the pile, then rubber granulate goes on top in the same way. On 50 mm artificial grass the sand supports the base of the fibre and the rubber controls how the surface feels underfoot and how the ball behaves. The finished depth is agreed per pitch, because a heavily used competition field and a school pitch do not want the same amount; confirm the figure before the infill is ordered.
What should we confirm before the rolls are produced?
The pitch dimensions and layout drawing, the pile height and density for the specification, the colour reference, the position of any second-sport markings, the base and edge details, and the infill depth you want. Rolls are produced with established artificial sports turf manufacturers against the approved sample, so the more of that is settled up front, the fewer surprises there are on site.