• 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable golf turf  for Pickleball Courts,Qianshu Turf,Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable golf turf  for Pickleball Courts,Qianshu Turf,Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts

10mm golf turf for new style with model QS038 with 2000MOQ

No.QS038
Specifications
Grass height:
10mm
Density:
33600 lbs
Weight:
7500d
Back material:
PP+net+sbr latex
$2.50-6.00
Download
View all downloads
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable golf turf  for Pickleball Courts,Qianshu Turf,Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts
  • 2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts,HealthLife,2026 eu Standard Anti-Aging Coating Pickleball Roll Flooring Durable Artificial Grass for Pickleball Courts

Description

Product Overview

This is a 10 mm polyethylene artificial putting green turf built for golf. The pile is cut short and tufted densely, so a ball rolls across it at a pace that belongs on a practice green, a club putting area, a teaching studio or a hotel terrace rather than sitting up the way it does on a longer landscape turf. Model QS038 is the current version of our short-pile golf line, supplied in rolls with a PP net and SBR latex backing already bonded to the underside. Buyers sourcing wholesale artificial turf grass for golf usually arrive from one of two directions: some are replacing a natural green that has become too costly to keep through a season, and some are fitting out a new practice area inside a sports hall, on a rooftop or beside a clubhouse. Both need the surface to look the same from the first putt to the last and to stay flat where players stand, which is why colour is made to your reference rather than pulled from stock. Day to day it behaves like a textile floor rather than a planted surface: no mowing, no irrigation, no fertiliser and no divots to repair. Debris is brushed or blown off, the pile is groomed upright, and play resumes. For commercial golf courses updating or constructing putting greens, this artificial turf putting green product meets stringent specifications for resilience, aesthetics, and playability necessary in high-traffic environments. Artificial sports turf manufacturers leverage this turf’s technical advantages to optimize installation workflows, ensuring that golf turf mats and custom color options fulfill client design and functional requirements with minimal downtime.

Green and blue fabric-wrapped turf rolls stored outdoors.Colorful fabric-wrapped turf rolls stacked in a warehouse.
Red fabric-wrapped rolls loaded into a shipping container by forklift.10mm golf turf for new style with model QS038 with 2000MOQ

Surface Performance & Ball Roll

  • A roll that holds its line: a golf artificial turf is judged on whether a putt breaks the way the player read it. Dense, uniform tufting keeps the surface even across the width of a roll and from roll to roll, so pace does not change as the ball crosses a join.
  • Pile that recovers: short blades standing upright spring back after a stance or a kneeling repair, and the surface does not mat into a flat patch the way a softer, longer turf does under repeated traffic.
  • Pace you can set: 10 mm gives a quicker surface than a 20 mm or 30 mm landscape turf. Final speed depends on the firmness of the base and the grooming routine, so it is set at installation rather than fixed by the roll.
  • Short-game variety: the same surface takes putting, chipping and short pitch shots, and can be cut into a golf turf mat for a teaching bay where the ball is struck from a fixed spot.
  • Comfort and its limits: over a firm base the pile is thin underfoot — comfortable to stand on through a long session, but not a cushion for running, sliding or tackling. Treat this as a golf surface, not a replacement for a football pitch.
  • Appearance through the seasons: the yarn carries an anti-aging coating intended to slow colour loss under ultraviolet light. Ask us for the current coating specification and any test documentation your project file needs.

Backing & Dimensional Stability

A putting surface is only as true as its underside, and an artificial grass golf green is no exception. This sheet is built on a PP net scrim — a woven grid that resists stretching along one axis and shrinking along the other when a roll is dragged into position. SBR latex is then spread across the back to lock every tuft into the net and give the sheet enough weight to sit down instead of lifting at the edges.

Turn over a putting green artificial grass sample and you will see the ribbed latex texture and a grid of small openings through the sheet. Those openings let air and water pass rather than trapping them under the pile — useful on an outdoor green after heavy rain, and on an indoor slab where condensation forms. The backing stays flexible enough that a piece can be folded by hand without cracking, which is what allows fringe bands and corner details to be cut and fitted on site.

Stability is what decides how the green looks a year later. A backing that creeps shows ripples along the line of a putt; this construction is specified so the sheet holds its size once it is laid over a properly compacted base and allowed to settle. Store rolls flat and lay them at normal outdoor temperatures and the surface should sit without tension — it is not designed to bridge hollows or hold down a base that is already failing.

Fitting Into Existing Turf Systems

Working with the base already in place. Most putting green artificial grass goes onto something that already exists — compacted aggregate, a concrete slab, or the drained profile left behind by a natural green. The turf is a surface layer, not a structure: it follows the shape and the falls beneath it. Confirming that the base is sound, that water leaves it, and that the levels still feed the cup positions is the first job on any project. If the base holds water, no backing will correct it.

Interfacing with a larger build-up. Where the green sits inside a wider sports development, the sheet has to meet whatever is next to it — a court edge, a pitch surround, a path or a clubhouse threshold. Teams laying alongside artificial sports turf manufacturers on those sites usually need the turf to arrive at a stated thickness with a clean, trimmable edge and to be cut to the drawn outline rather than a stock size. Send the setting-out plan with the enquiry and we can plan the roll lengths around it.

Colour zones and the fringe. Clubs often want the putting surface in one shade and the fringe or surround in another. Because colour is made to order, two shades can be produced for the same project and shipped together, which keeps the join between them even. Approve both against physical samples before the run — a screen image will not show the difference between two close greens.

Indoor and outdoor conditions. An indoor installation wants a sub-base that will not move and a perimeter fixing that holds the sheet flat; an outdoor one wants drainage and an edge that resists wind lift. Where an artificial turf putting green runs from inside to outside, plan the transition as a level threshold rather than a ramp, and keep the base specification the same on both sides. Crafted from premium PP and PE fibers, this golf turf product exhibits a uniform 40 mm grass height with a pile density optimized for wear resistance and natural aesthetics. The 10,500 lbs turf weight ensures dimensional stability under dynamic use. Production timelines range between 7 to 15 days, supporting efficient project scheduling without compromising quality. The backing provides durability and stability for high-performance surfaces such as pickleball courts. We offer expert guidance on installation.

Who This Turf Serves

  • Golf clubs and practice facilities: a worn, shaded or weather-damaged green is the usual trigger. What matters is how the ball rolls, how the surface looks from the tee, and how much of the maintenance team's week it takes up.
  • Putting studios, simulators and coaching venues: the surface has to sit on a floor that cannot be dug up, hold a line under repeated putts from the same spot, and be re-cut when the layout changes.
  • Sports turf contractors and installers: teams laying for artificial sports turf manufacturers, or directly for clubs, need a sheet that seams flat, trims cleanly around a cup, and arrives in rolls that match the setting-out drawing.
  • Distributors and importers: buyers adding wholesale artificial turf grass to a catalogue want one short-pile model that covers putting, chipping and multi-use practice areas, with the shade repeatable between containers.
  • Hotels, resorts and event venues: a green beside a terrace or in an atrium has to look tidy with almost no attention and survive guests walking across it in the wrong shoes.
  • Designed to provide consistent ball roll and surface comfort, the artificial putting green turf achieves superior user performance benchmarks. Its balanced fiber composition reduces maintenance demands and resists mat flattening, critical for recreational and competitive use. For artificial turf suppliers, this product offers a compelling ROI through low lifecycle costs and warranty-backed quality assurance.
  • Private golf clubs: an artificial grass golf green beside the clubhouse or the first tee gives members a surface that stays playable while the natural greens are closed for maintenance or frost.
  • Driving ranges and coaching academies: target greens and short-game zones take a high volume of balls from the same spots, and a dense short pile keeps the surface readable instead of pitted.
  • Indoor studios and simulators: bay floors, putting lanes and analysis areas where the ball is rolled or struck hundreds of times a day. The sheet is cut to the bay, so one worn lane can be replaced without lifting the rest.
  • Schools and community sports centres: introducing golf into PE needs a golf turf mat area that survives daily class turnover without a maintenance contract attached to it.
  • Hotels, resorts and leisure venues: a putting lawn beside a terrace or a pool deck is a guest amenity, and it has to look presentable with housekeeping-level attention rather than greenkeeping.
  • Multi-sport clubs: where a putting area sits beside padel or tennis courts, the short pile gives players a clear change of surface and a clean edge line to aim at.

Construction & Specifications

ModelQS038
YarnPolyethylene (PE)
Pile height10 mm
Density33,600 lbs
Yarn weight7500d
BackingPP net with SBR latex
Backing colourDark
Pile appearanceShort upright blades, bright green
ColourMade to order
FormSupplied in rolls
Typical usePutting greens, practice areas, indoor golf studios
TrafficHigh-traffic putting and practice use
EnvironmentIndoor and outdoor installation
UV treatmentAnti-aging coating applied during manufacture

Installation Sequence

  1. Prepare the site. Lift the old surface if there is one, clear roots and debris, and check that levels fall towards the drainage. Any soft spot in the base will telegraph through a 10 mm pile, so repair it before anything is laid.
  2. Set out and mark. Stake the outline of the artificial turf putting green, mark the cup positions and the fringe line, and check the diagonals so the shape sits square to the surrounding paths and buildings.
  3. Lay the base. Compact the aggregate or prepare the slab, then blind it with a fine layer so the surface is smooth and firm underfoot. On an outdoor green the base carries the drainage; on a slab, check that falls lead to an outlet.
  4. Lay the turf. Roll out the artificial putting green turf and leave it to relax, then trim to the marked line, keeping the pile direction running the same way on every roll. Join edges with seaming tape and adhesive, and set cups and sleeves before the joins are closed.
  5. Work in the infill. Dry silica sand is brushed into the pile to weight the surface and settle the blades; where the specification calls for a rubber granule layer, it goes down after the sand. Grade and quantity are agreed per project — confirm them with us before the bags are opened.
  6. Brush and finish. Work the surface over with a brush to lift the blades and settle the infill, trim any stray fibres or loose tufts at the edges, fit the edging or kerb, and clean the site down.
  7. Replacing a worn surface is a different job from starting from scratch, and most of our golf work is replacement. A tired green usually shows it in the same places: a polished line where everyone walks to the cup, flattened pile in front of the tee, and a golf turf mat area on a range that has been struck from the same spot for years. Cutting out the worn section and re-laying is often enough, and where stock allows the new piece is taken from a run that matches the original shade. New builds ask more of the schedule. A club or a contractor working with artificial sports turf manufacturers will have a reopening date, and the surface is the last trade in and the first thing members see. Give us the drawn areas, the base type and the target date at enquiry stage, so production is planned against the construction programme rather than started after the base is finished. Colour approval and any fringe detail should be settled before production begins, so nothing has to be re-cut at the end of the job. Why the dressing sets the pace. An artificial grass golf green is a thin surface, and what sits between the blades decides how the ball behaves at least as much as the pile height does. Sand gives the fibres something to stand against, holds the sheet down in wind and stops the pile fluffing into a soft, slow nap. A green dressed too lightly plays slow and mats quickly under footfall; one dressed too heavily feels hard, makes the ball skitter and loads the backing more than it needs. Grade and rate agreed per project. No single rate suits every green. The silica sand grade and the quantity per square metre are agreed against the density of the roll, the firmness of the base and the pace the club or studio is aiming for, and both are written into your quotation before production is scheduled. Record the figures — they are what you re-order to when the surface is topped up later. Applying it in two passes. Spread dry sand in two passes rather than one, brushing each pass into the pile so it settles evenly instead of sitting in ridges. Keep the brushing in one direction across the whole green so the grain of the surface stays consistent, and mask the cup sleeves and the fringe line until the dressing is finished. Rubber granule where it is specified. Where a project asks for a rubber granule layer, it follows the sand and is brushed in the same way. The granule adds resilience underfoot and slows how quickly the pile compacts in a heavily used bay, which is why teaching studios and range target greens often specify it and a members' putting green usually does not. Final groom. One last pass with a stiff brush stands the blades upright, blends the dressing through the pile and evens the colour. Always brush with the pile; brushing against it leaves a putting green artificial grass surface looking open and patchy in low sun. Top-up. Dressing settles over time and some of it leaves on players' shoes. Check the level at the start of each season, top back up to the recorded rate and brush it in. A golf turf mat in a teaching bay will usually need topping up sooner than a green that only sees putts. The product meets relevant EU anti-aging coating standards, offering extended lifecycle performance ideal for sports clubs, recreational venues, and commercial golf facilities. It is engineered to integrate seamlessly within modern artificial sports turf manufacturers’ portfolios, delivering reliable performance both indoor and outdoor. Its customizable colors allow alignment with branding and design requirements, enhancing its appeal for facility refurbishments and new builds requiring professional-grade golf turf mats or artificial turf putting green installations.

Handover & Maintenance Schedule

TaskIntervalWhat it involves
Handover walk-throughOnce, before the green opensWalk the completed green in daylight with the installer: every seam, the fit of the cup sleeves, the fringe line, the edge fixing and a drainage test. Agree who owns the routine below and where the offcuts are stored for later patches.
Litter and bunker sandTwo or three times a weekBlower or soft rake to clear leaves, seed heads and sand thrown out of bunkers. Material left lying works down to the base of the blades and dulls the surface.
Pile groomingEvery one to two weeks, more often at a busy clubA stiff nylon brush drawn with the pile stands the blades back up and keeps an artificial putting green turf rolling evenly, including the worn line between the tee and the cup.
Cup and footfall rotationMonthlyMove the cup positions and turn the standing area at the tee end so wear spreads across the green instead of settling into one patch; check the cup edge for compaction while you are there.
Indoor lanes and baysWeekly during the seasonVacuum rather than wash a golf turf mat inside a studio or simulator bay, wipe up marks left by clubs and shoes, and keep the room ventilated so condensation does not sit under the backing.
Seams, edges and drainageQuarterly, plus a check before the wet seasonRun a hand along the joins, re-fix any lifted edge and clear the outlets so water leaves the base the way it was built to.
Annual deep cleanOnce a year, before the season startsLift the pile with a powered groomer or a stiff brush, wash the surface down, remove any algae film on shaded edges and inspect for thin patches and open seams.

Related Golf Models

  • 8 mm soft putting green (QS073): a shorter, softer build for indoor lanes and teaching bays where players putt from a standing position and comfort counts for more than pace.
  • 10 mm golf durable artificial grass (QS072): a second 10 mm golf option in the range; compare the two against your traffic level and budget before deciding.
  • 45 mm soccer field turf (QS071): a football surface — specify this instead when the area has to take running, sliding and studs.
  • 45 mm sport outdoor turf (QS070): a general outdoor sports surface for multi-use grounds and training areas.

Packing, Delivery & Order Terms

Minimum order2,000 sqm, one container
Production time7–15 days after specifications are confirmed
ShippingBy sea, about 30 days transit
Supply basisWholesale artificial turf grass, in rolls
PackingRolls on protective cores, wrapped and labelled per order
LoadingCoordinated with your forwarder or with ours
Indicative price$2.50–6.00, confirmed on your quotation
WarrantyTerms confirmed in writing with your quotation
Markets servedSouth America, North America, Europe and parts of Africa

Quality Control & Inspection

Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.

FAQ

What materials are used to make this putting turf?

The pile is polyethylene (PE) yarn, tufted into a PP net backing that is locked with SBR latex. PE is used for the face because it holds colour well and stays soft at a short pile height, the PP net gives the sheet its dimensional grip, and the latex holds each tuft and adds weight. The yarn also carries an anti-aging coating; ask us for the current coating specification if your project file needs it.

Can the turf be produced in a colour to match our club or brand?

Yes. Colour is made to order rather than picked from a fixed range, so a putting green artificial grass order can follow a club palette, a sponsor colour or a landscape scheme. Send a physical reference or a colour code and approve a sample before the run starts — keep that approved piece, because it is what the production rolls are checked against. A green shade and a fringe shade can be produced together so they arrive consistent.

How does a 10 mm pile compare with a longer turf for putting?

A 10 mm pile is short enough that the ball runs across the surface instead of riding up over the blades. Longer golf artificial turf — the 20 mm and 30 mm landscape range, or a pitch surface — cushions the ball and slows it, which suits a lawn or a playing field but not a green. The trade-off at 10 mm is underfoot comfort: it is firm to stand on, which is exactly what a putting surface should be. If the same area has to take running and sliding, use a pitch model and keep this one for golf.

Will the joins show once the green is finished?

A tufted artificial turf putting green has a pile direction, and a join reads as a line where two rolls meet with the pile running opposite ways. Every roll on a green is laid the same way and the seam is trimmed so the pile meets blade to blade, which makes the joint hard to pick out from standing height. On a fringe the direction is set deliberately so the pile sweeps towards the surround. Look at the seams in daylight at handover rather than under floodlights.

How do we keep the surface clean through the playing season?

Most of what lands on an artificial grass golf green is leaf litter, seed heads, sand from bunkers and the occasional mark from a wedge. A blower clears the loose material, a stiff synthetic brush lifts the pile and pulls debris out from the base of the blades, and a hose-down deals with dust. Keep fertiliser, weedkiller and line-marking paint off the surface, and clear the drainage outlets before the wet season rather than after it starts.

Leave a message
FirstName*
LastName*
Email*
Message*
Verification Code*
Click to verify