At 45 mm, this is the longest pile in our football range and the surface we recommend when a pitch has to carry competitive fixtures rather than occasional training. Buyers comparing 45 mm artificial grass across suppliers usually start with those two numbers, because together they decide how the pitch feels underfoot and how long the surface keeps its appearance. The model number QS040 records a build prepared for a German customer, and the same specification is what we quote for European pitch work: a medium-soft surface that stays playable through a wet autumn and keeps its tone through a cold winter. It is used on full-size pitches, training grounds, school fields and community sports areas, and it replaces natural turf that has become uneven, muddy or too expensive to irrigate. As a football turf manufacturer, we work to those three points on every pitch order, and we will say plainly when a requested date will not hold. The close-up photographs on this product show the pile at the cut edge of a roll, with the dark coated backing visible beneath the green. That edge is worth studying on any sample you approve, because it shows how densely the tufts are set and how much coating sits behind them. The dual-material build combines PP and PE fibers for structural resilience and a more natural feel, while the modular PP net and SBR latex backing helps hold its shape under mechanical stress. It can be integrated with a range of base substrates and drainage systems, so layout and installation details can be adapted to the project and climate. - Match-length pile that plays like a pitch, not a carpet. At 45 mm the pile is deep enough for a stud to sit in and for the ball to run true, which is what separates a football surface from a short landscape turf. - A backing that keeps its shape. PP net plus SBR latex holds the roll square, so the turf lies flat on the base and stays flat once the infill has been brushed in. - Colour made to your brief. Club colours, line colours and a specific green can be produced to order — as an artificial grass supplier we confirm the shade on a physical sample before the run starts. - Safe underfoot for mixed-age use. The pile and infill combination is firm enough to run on and forgiving enough to fall on, which matters where school and community games share one surface. - One build across football and general sport. The same turf is used for an artificial grass soccer field, a school games area and a community multi-use zone, which keeps a group of venues on one specification.
Construction & Design
The pile is tufted from a polyethylene yarn with PP in the blend, the combination behind the surface's balance of softness underfoot and spring-back after loading. The blades are curled rather than straight, which is why the turf reads as a dense mat in the photographs instead of a flat green sheet; curled PE artificial grass traps a thin layer of air in the pile, so the surface has some give underfoot and looks like mown grass from a distance.
Under the pile sits the backing system. A PP net gives the roll its dimensional stability, so the turf does not stretch out of square when it is unrolled and left in the sun, and the SBR latex coating locks the tufts in place and keeps water out of the cloth. In practice that means the roll stays flat on the base, seams pull together cleanly when the installer glues them, and the backing does not soften or delaminate through a wet season.
The construction also sets how the rest of the pitch is built. Because the backing is dimensionally stable, an artificial grass soccer field can be laid over a compacted aggregate base, and the surface accepts both glued seams and line panels cut from the same roll. Lines are normally inlaid as separate panels bonded into the surface, which keeps them crisp after brushing instead of painted lines that fade or flake. The backing also takes edge fixings and earthing points where an installation needs them. The surface balances softness with a dense fiber arrangement for load-bearing capacity and user safety in high-traffic landscaping. Its waterproof performance supports quick drainage and helps limit mold, while color retention and easy cleaning help keep long-term upkeep costs down.
Performance & Surface Behaviour
Wet-weather drainage. Water leaves the surface through the base build-up rather than sitting on the pile, so a 45 mm football turf pitch is back in use shortly after rain instead of being called off.
Consistent ball roll. The dense face keeps the ball moving at an even speed across the pitch, and the surface does not develop the soft, churned patches that redirect a pass on natural turf.
Load-bearing under repeated training. The fibre arrangement spreads stud pressure across the pile, which is what keeps an artificial turf football field looking level after a full season of sessions on the same half.
Colour that holds. Colour is set into the fibre during production, so the pitch keeps its tone through sun and frost instead of bleaching through the first summer.
Stable in cold and heat. The backing does not go brittle in frost or soften into waves in high summer, so the surface stays flat across a European year.
Landscape & Grounds Integration
Clubhouse surrounds and spectator areas. Where a 45 mm football turf surface meets paving, the same pile carries through to the run-off areas so the pitch and its surroundings read as one surface rather than two.
Residential gardens and shared courtyards. A durable alternative to a lawn that has stopped coping with shade, dogs or foot traffic, with no watering, no mowing and no mud tracked indoors.
Commercial frontages and terraces. Courtyards, roof terraces and entrance lawns that have to stay green all year and look presentable without a grounds contractor on site every week.
Rooftop and podium areas. Confirm the structural loading and the drainage outlet positions with the building engineer first; the turf is light, but the base and ballast still have to be designed for the deck.
Applications Across Multiple Industry Segments
Full-size match pitches and training grounds are the main use. A 45 mm football turf holds enough infill to give the surface proper playing depth, and it is the pile height clubs choose when the same field has to host fixtures at the weekend and training through the week.
Schools, colleges and community sports grounds use it for games areas that survive constant use by players of different ages. On an artificial grass soccer field of this kind, the surface does not need closing for recovery, so a school can run lessons, lunchtime games and after-school clubs on the same pitch without the wear showing.
Distributors and importers add it to a range as the match-grade line above their 40 mm product, and keep the same build across repeat orders so their own customers receive the same surface twice. If you are planning wholesale football turf supply for a region, this is the model that carries the top of a football range rather than the entry point.
Sports field contractors and installers are the people we speak to most on this model. They want a specification sheet they can hand to their client, rolls that arrive in the colour they approved, and a pile that accepts infill without matting down in the goalmouth. The 45 mm depth gives their crew enough pile to work with when they cut in lines and dress the surface, and the backing takes a glued seam cleanly. On wholesale football turf orders that repeat across several pitches, we hold the same yarn and backing so the second field matches the first. Clubs, schools and community venues come at it from the season ahead: how many hours a week the surface will take, who is going to brush it, and what it costs to keep playable. A 45 mm artificial turf football field takes mowing, watering and line painting out of the weekly routine, and the surface stays open through wet weather instead of cutting up the way a natural pitch does in midwinter. Landscape professionals, property developers and grounds managers specify it where a sports surface and a landscaped area meet: the run-off strip behind a goal, a warm-up zone beside a clubhouse, or a courtyard that has to look green all year. Custom dimensions and colours are confirmed against a drawing before production, and the same build suits a new installation or the replacement of a worn carpet on an existing base. The turf is made from PP and PE fibers with a 20 mm pile height and a density figure of 16,800. Its backing combines PP netting and SBR latex for dimensional stability and water resistance, and it carries a five-year warranty.
On a site with more than one pitch, the questions move from the turf itself to how the whole facility performs. A 45 mm surface wears at a similar rate across goalmouths, the centre circle and the run-offs, so an artificial turf football field does not need patching halfway through a season, and a second pitch built from the same specification will match the first. Community and multi-sport venues often use one surface for football, training and general recreation. The pile takes the extra foot traffic without flattening, and the infill can be topped up locally as the surface beds in — a simpler job for a grounds team that is already stretched across several facilities. Where a tender or funding application needs product information, ask your sales contact for the specification sheet, sample and any test documentation available for the batch before production is booked. Site programmes normally combine base works, turf installation, infill and a settling period, so plan the turf delivery against the base completion date rather than the other way round.
Specifications
Property
Value
Yarn
Polyethylene (PE) with PP
Pile height
45 mm
Face density
10,500 lbs
Yarn weight
8,800 dtex
Backing
PP net + SBR latex
Backing properties
Water-resistant, dimensionally stable
Colour
Made to order, confirmed on an approved sample
Roll size
Agreed per order
Main use
Football match and training pitches
Infill
Type and depth agreed with the installer before production
Production time
7 to 15 days, with shipping time quoted separately
Warranty
Five years, with the coverage terms confirmed on your order
Pitch Installation Sequence
Site preparation. Strip the existing surface, set the finished levels and falls, and build in the edge restraints before anything is rolled out. Check that the base drains away from the pitch rather than towards the centre.
Measuring and line marking. Set the pitch out from the base — corners, centre line and penalty areas — and confirm the dimensions against the drawings before the turf is cut. Lines are usually inlaid as separate panels, so their positions have to be fixed before the rolls are laid, not after.
Base layer installation. A compacted aggregate base with a geotextile separator carries the turf and takes the drainage. The base needs to be smooth, firm and porous; a hollow will telegraph through a 45 mm pile once the infill goes in.
Laying the turf. Rolls are laid in the same direction, left to settle to the base temperature, then trimmed and seamed. A 45 mm artificial turf football field is laid with the pile running one way so the surface shades evenly, and each seam is glued and weighted while it cures.
Infill with silica sand and rubber granules. Silica sand goes in first and is brushed deep into the pile; rubber granules follow as the performance layer. Both go down in passes with brushing between them, and the finished depth is checked against the agreed specification rather than judged by eye.
Brushing and finishing. A power brush stands the pile up, lifts any flattened areas and works the infill evenly across the pitch. Edges are trimmed, surplus material removed, and the surface walked for high or low spots before the final line check.
Handover and maintenance. Walk the pitch with the client, hand over the maintenance routine and the records kept during installation, and agree who brushes and inspects the surface through the first season. Confirm the handover checklist with your sales contact before the crew leaves site.
- Covered training halls and air domes. A 45 mm football turf laid inside a permanent hall stays dry and playable through the whole winter, and a hall usually books far more hours a week than an outdoor pitch. Agree the brushing routine and the first infill top-up before the pitch opens, not after the first month of use.
The base and the drainage still matter. Indoors you are normally laying over a concrete slab or a compacted base built to falls, with a channel or gully at the perimeter to take cleaning water and condensation. Confirm the falls and the outlet positions with the building engineer before the turf is ordered, because they cannot be corrected once the carpet is bonded down.
Infill goes in indoors too. Silica sand and rubber granules give the pile its weight and its footing, and the finished depth is agreed with your installer in the same way as on an outdoor pitch. Dust from dry sand is the usual complaint in a closed hall, so talk through the granulate choice and the hall's ventilation with the installer before dressing day.
Edges, thresholds and service covers. The turf is turned up and fixed into a perimeter kerb, kick rail or threshold, and door openings, running-track lines and floor boxes each need their own trim detail. Mark those positions on the base drawing — cutting them in at the edge is far quicker than patching them afterwards.
Getting the rolls inside the building. Give us the door width, the corridor route and any lift or stair restriction when you order, and the roll lengths and widths are planned around them. Roll size is agreed per order anyway, so this belongs in the quotation conversation rather than on delivery day.
Line marking behaves the same indoors. Lines are inlaid as panels cut from the same roll and bonded into the surface, which keeps them sharp under repeated brushing. Where one hall hosts football, handball or several court layouts, different line colours can be planned on a single drawing.
Colour under hall lighting. Daylight through glazing, LED panels and older sodium fittings all change how a green reads. If the shade matters, approve the sample under the lighting that will actually be in the hall — a PE artificial grass surface will be seen under that light far more often than in direct sun.
Halls that switch between sport and events. Where the floor also hosts assemblies, exams or exhibitions, decide with the venue whether the turf is permanently bonded or laid as a removable system before the order is placed. Upkeep indoors is about dust rather than weather: regular brushing, vacuuming after events and topping up infill at the goalmouths, with no mud and much slower colour change to deal with.
Packing & Shipment
Rolls are wound on cores, wrapped and labelled with the model, roll length and colour, so a container can be checked off against the packing list before it is opened on site. Roll width and length are agreed with the order, and we plan the layout so the lengths suit the pitch instead of leaving a high proportion of offcuts.
For a mixed order the loading plan is drawn up before the container is filled: heavier rolls low and along the centre line, lighter items on top, and the whole load strapped so nothing shifts in transit. Where a project needs several surfaces — a match pitch, a training area, a putting green — they can travel in one consolidated shipment rather than arriving in separate deliveries.
Sea freight is hard on turf packaging if it is left to chance. Wrapping and core protection are specified for a long sea leg, and the packing list and loading photographs are sent before the container leaves so you know what was loaded and in what order. As a football turf manufacturer shipping into Europe, we plan the documents and the loading sequence with your forwarder, and we flag any destination requirement we cannot meet before the order is confirmed.
Ordering & Delivery
Send the project details. Pitch area in square metres, destination port, target installation date and the specification you need. Orders start from 2,000 sqm, which is one container, so the area and the roll layout are usually planned together.
Approve the sample and specification. Colour, pile height, backing and roll size are confirmed against a physical sample before production; ask your sales contact about sample availability and the time needed for your colour. As an artificial grass supplier we keep the approved sample on file against the production run.
Production. Once the specification and the order details are confirmed, production runs 7–15 days.
Shipping. Sea freight takes about 30 days to most destinations. We book the shipment, send the loading photographs and packing list, and work to your forwarder's schedule where you have one.
Before the container is released. Check the inspection record, the shipping documents and the warranty terms for your order — the published warranty on this range runs five years, and your sales contact can confirm the current terms and what they cover. Payment terms are confirmed with the quotation.
Quality Control & Inspection
Working as an export specialist from Nantong, Jiangsu, we build quality checks into every stage of an order rather than leaving them to the end. Before bulk production, yarn, colour and backing are confirmed against the approved sample; during production we check pile height, density, tufting and backing at the supplier; before loading, rolls, colours and packing are checked again and the inspection record is shared with you. If you prefer an independent eye, we can coordinate third-party inspection such as SGS or BV, book the visit and follow up on any defects found. Faulty rolls are replaced or credited before shipment, and each carton leaves with its packing list and inspection sheet.
FAQ
What is the turf made of?
The yarn is polyethylene blended with PP, tufted into a 45 mm pile at 10,500 lbs face weight on an 8,800 dtex yarn. The backing combines a PP net for dimensional stability with an SBR latex coating that locks the tufts and keeps the cloth water-resistant. As a football turf manufacturer we specify yarn, pile and backing together, because a surface only performs as well as the weakest of the three.
Can I choose the colour and the technical specification?
Yes. Colour is made to order, and pile height, density, backing and roll size are agreed with your project before production. Any change is checked against a physical sample first, and wholesale football turf orders are produced to that same approved sample each time, so a repeat order matches the one before it.
What maintenance does a 45 mm pitch need through the year?
Less than a natural pitch: no mowing, no watering and no line painting. The routine is brushing to keep the pile upright, clearing leaves and debris, topping up infill where it has bedded down, and checking seams and drainage outlets before and after the season. PE artificial grass does not need feeding or reseeding, so the maintenance budget goes on brushing and occasional infill rather than machinery and water.
Is 45 mm the right pile height for my project?
Choose 45 mm artificial grass when the surface has to carry competitive football and a full training week. A 40 mm build suits school and training pitches better where the ball spends more time on the ground and the budget per square metre is tighter. If you are unsure, tell us the level of play, the hours per week and the base you are building, and we will recommend the pile height and infill depth that fit.
Can the turf be used indoors or under a roof?
Yes. The same surface is used in covered training halls and indoor sports buildings, where the absence of rain and direct sun actually makes upkeep simpler. You still need a proper base, infill and edge fixing indoors, and the ventilation and lighting of the hall affect how the surface plays, so plan those alongside the building design.
What should I confirm before the order is placed?
Confirm the pile height and colour against a physical sample, the roll layout and line positions against your drawings, and the base and drainage design against the turf's requirements. As an artificial grass supplier we can review your base drawing against the specification before production. It is also worth agreeing who brushes and inspects the surface in the first season — that single point causes more disputes on a new pitch than the turf itself.